No hay artículos en el carro
No hay artículos en el carrocustomer
Comentado en los Estados Unidos el 16 de marzo de 2025
Nice little box, I used on to make a120 V AC Voltage monitor. I had a small 0-300 volt AC meter that fit on the the box. The only other thing needed was a line cord. The analog meter shows voltage and fluctuations on the circuit feeding my Ham station.
Customer
Comentado en Canadá el 10 de marzo de 2025
These are great boxes.Fast delivery Great price and good quality.
JEBates
Comentado en los Estados Unidos el 31 de julio de 2024
used this to house a small ESP-based microcontroller and relay for a lighting project. gasket fits well and makes a solid seal. i drilled a hole to accommodate some wiring though and it was easy enough to drill with a standard bit. be aware the inner dimensions are not perfectly rectangular due to the screw holes in each corner. sturdy, solid construction.
PaulStLMo
Comentado en los Estados Unidos el 7 de septiembre de 2024
I found the gasketing they sent was just a tiny big shorter than what it should have been. But since my application is dry, not a big deal.
Truthsayer
Comentado en los Estados Unidos el 12 de noviembre de 2023
I'd take off 1/2 Star since you have to install the gasket and it isn't a continuous gasket, but the box is sturdy for being plastic, has stainless screws, and is offered at a decent price. I will buy more. I'm using one box to mount a buck converter, on/off switch, and 9vdc power jack with a battery converter mounted on top for a Milwaukee Fuel battery. It provides ample, clean power for guitar pedals. The batteries last many gigs before needing a recharge, it's easy to carry a spare battery and it eliminates searching for a 117vac outlet, ground loops and having another power cord on the stage. Use a daisy chain, plug and play, excellent clean power and far less expensive than the regulated, filtered power supplies they try to sell you. FYI, you can do the same with a DeWalt battery adapter, or any other. You'll need this box, the battery adapter (they come with on/off switches and fuses), a buck converter and a DC out jack. Tools; a drill and bits, screws to mount the battery adapter, a soldering iron with solder, and a multi-meter to set the buck converter voltage. Not difficult to do.
Productos recomendados