Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CPROSP - Conector de tijera para coche/SUV/MPV (carga 2T de 4200 libras/2T), solo para llave de neumáticos, solo para uso de emergencia, no para proyectos semanales

Envío gratis en pedidos superiores a Mex $600.00

Mex $518.96

Mex $ 275 .00 Mex $275.00

En stock

Acerca de este artículo

  • Capacidad de carga: 2000 kg. ! Solo para el cambio de neumáticos, no estés debajo del coche y recuerda poner el equipo P en primer lugar. ! !
  • Altura máxima de 15 pulgadas, altura retraída 4.1 pulgadas, instalación soldada. Por favor, mantén la varilla siempre tiene aceite antes de usar, de lo contrario dañará el gato de tijeras.
  • Se adapta a vehículos más pequeños a medianos, por ejemplo: pop-ups, remolques, autocaravanas y caravanas.
  • La necesidad de tu coche.
  • Incluye: 1 gato 2T (2000 kg); 1 llave de carraca.


Con este conector de tijera puedes mover tu vehículo de forma fácil y segura a la altura deseada.

La práctica llave de trinquete incluida y el eje integrado y fácil de usar, hacen que el cambio de rueda sea muy fácil. Además, la placa base pesada proporciona un soporte seguro.

Obtienes productos nuevos de la mejor calidad.

Caracterizado por su capacidad de transporte segura, resiste alta presión, resistente a la corrosión, no debe faltar en ningún vehículo, construcción de metal fuerte hecha de acero.

Características del producto:

Tipo de producto: Scissor Jack with Ratchet Wrench

Capacidad máxima de carga: 2T (2000kg/4,409 libras)


CPROSP Tijeras Jack con una carga más alta que la mayoría de otras marcas.

Altura mínima de elevación: aprox. 105 mm.

Altura máxima de elevación: aprox. 385 mm.

Dimensiones del producto: 425 x 90 x 105 mm.

Peso bruto del producto: 2.35 kg/5.2 lbs


Manual de funcionamiento:

1. Inserta el mango en el agujero de la manga de agarre.

2. Asegúrate de que el sillín esté correctamente colocado. Para evitar dañar el enchufe, no mueva el enchufe mientras el mango del enchufe está intacto.

3. Para aumentar la carga, utiliza una mano para sujetar la parte delantera del mango y girar la otra mano en el sentido de las agujas del reloj en la parte posterior del mango.

4. Para bajar la carga, utiliza una mano para sujetar la parte delantera del mango y gírala lentamente en sentido contrario a las agujas del reloj con la otra mano en la parte posterior del mango.



sandra everett
Comentado en Canadá el 1 de febrero de 2025
Good quality quick shipping. Great replacement for jeep wrangler.
Lenier Claro Leon
Comentado en los Estados Unidos el 4 de abril de 2025
Muy buena calidad
Kira
Comentado en los Estados Unidos el 26 de abril de 2024
The first time I used it, it tore off the thread on the screw, it was complete crap, I threw it in the trash
Snowman
Comentado en Canadá el 3 de noviembre de 2023
As the manufacturer indicates, this jack and handle are not for daily use. I purchased it for roadside tire change emergencies.One thing to note is that while the jack range is OK for my vehicle (Mitsubishi Outlander), it cannot raise the vehicle high enough without two 2x8 blocks underneath (effective 3" lift). This was not a big deal for me as I just cut up some off-cut timber; it was worth that little bit of aggravation to have such a small/light build jack, I just put the blocks in the tire bag. I suggest that buyers jack their vehicles up at home (if you are using it for emergency tire changes) and see if you also need blocks or not.The handle is a ratchet, that works very well, but like the jack itself is of light build, so not meant for regular use. It is a short handle so takes a lot of half turns of the jack screw to work, but for an emergency system, this is fine.Please note that I rated this so highly as it is what it claims to be. If it tried to pawn itself off as a regular use jack I would have rated it poorly; but that isn't the case.
John Agcanas
Comentado en los Estados Unidos el 14 de septiembre de 2023
The jack failed the first time I used it. I was very disappointed. I bought the jack because of the ratchet design. However; the ratchet was made from what appeared to be plastic. As I was raising my car, the floor jack bolt became harder and harder to turn. The ratchet plastic started to crack, and eventually, the bolt start to twist and bend on the end. It’s worth noting that my car has a curb weight of just under 3000 lbs, and this is rated at 4400 lbs! Not to mention, I was only raising my front driver side to remove the wheel (and at the lift point recommended in the manual). It got to the point where it became impossible to turn the bolt anymore without it breaking off. The jack was still raising the side of my car by about an inch, but luckily the wheels were touching the ground. I didn’t have any other tools, so I had to keep hit and hammer away at the jack for it to tilt sideways and get it off my car. I would not recommend this jack. Save yourself the trouble, learn from my mistake, and invest in a better jack. Last thing you want is for anyone to get hurt.
Productos recomendados

Mex $769.93

Mex $ 423 .00 Mex $423.00

5.0
Elegir

Mex $1,648.60

Mex $ 659 .00 Mex $659.00

4.5
Elegir

Mex $644.25

Mex $ 315 .00 Mex $315.00

5.0
Elegir