No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Este estilo tiene un guardabarros interior trasero. Si lo desea, puede comprobarlo en nuestra tienda.
Si no entiendes cómo conectar el cable de luz LED con la fuente de alimentación, haz clic en la imagen para ver la guía.
Se debe realizar una modificación elevada para instalar estos guardabarros interiores Es posible que se requieran pequeñas perforaciones y holgura adicional para neumáticos de gran tamaño.
Los guardabarros de plástico del coche original se veían muy mal, y el guardabarros original no se pudo instalar después de las cejas de la rueda.
Los guardabarros interiores de aleación que proporcionamos resuelven eficazmente este problema y protegen eficazmente la estructura dentro del coche, que son hermosos y únicos. Permite a cada Wrangler modificado añadir ojos mientras conduce por la noche. Herramientas de instalación y guantes
Comprueba la imagen. Los accesorios de tornillo se actualizarán continuamente. Las imágenes son solo de referencia. Consulta el producto real.
Mike
Comentado en los Estados Unidos el 4 de febrero de 2025
Love these fender liners! Installed on my 2020 wrangler in an hour and a half. All the lights work, simple install!
Rodneycru3rds
Comentado en los Estados Unidos el 9 de abril de 2025
Look wonderful
Nightmare
Comentado en los Estados Unidos el 19 de febrero de 2024
Tried to install these fender liners and they are horrible. Instructions unclear and lack identifying the parts, so you have to try all manners to assess the 4 pieces and it is junk. The tab on one of the pieces broke so there goes that. The mounting bracket has no clear location on the picture or on the Gladiator. Lights don’t work, black with black, red with red. No light. Don’t waste your money and time. I can’t return this junk cause it broke.
Ted Cossette
Comentado en los Estados Unidos el 21 de agosto de 2022
2 things these need. Black bolts and better wire coming off the lights. Like a lot of others have said the wire is so thin you cant strip the insulation. I had to lightly shave it off with a razor blade but even with the 4 thinner than hair strands the light somehow got the juice it needed. Other notes about the wiring, if you are doing fronts its easy use the wire for your fender running lights. For rear it’s trickier but not difficult if you know which wires. They give you red and yellow extensions but basically your white goes to tail light and black to ground. Remove your tail light. The connector closest to the jeep is the one you unplug. When you look at it the ground is on top and black. The tail light wire is the one right next to it so those are the wires you need. Install on the inner fenders is complicated at best but its a slightly mis-shaped piece of aluminum, follow the video and muscle and swear your way through it. I didn’t use the little triangle bracket towards the front. Theres just nothing I could do to get it to line up right but its certainly supported enough with all the other ones. I would pre-drill pilot holes for the self tapping screws they aren’t the sharpest screws and the pilot holes makes it so much easier. When installing do the top bolt first. I had trouble with it because of my current fenders and the bracket seemed to bend up just the tiniest bit. Once I figure that out and bent it down I could get it threaded. Then do the 2 bottom holes with the spacers behind them, again muscling them into position. Start with the drivers side. It’s ten times harder than the passengers. I have another one of theres in my front wells with stars and the two together look great so I wont say its not worth it. The price is great, its definitely worth it just expect a little out of the box thinking and again a few 4 letter words but really its worth it considering the competition is equally difficult to install and so much more expensive. That and lights are just cool, but beware they are sealed and they do burn out. My fronts are a year old and one light died already but you can occasionally buy them by themselves on amazon just keep an eye on it and stock up because ive not seen them elsewhere and believe me I looked. All in all, kind of cheaply made but they look good work good, protect well, and comparatively are really inexpensive.
Nadeem Hood
Received the product, but some of the LED parts to light it up were missing!!!!
Productos recomendados
Mex $629.99
Mex $ 346 .00 Mex $346.00
Mex $585.35
Mex $ 304 .00 Mex $304.00
Mex $2,057.20
Mex $ 843 .00 Mex $843.00