Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Máquina peladora de alambre para calibre de taladro de 0.04 a 1 pulgadas, pelador de cobre de raspado, herramienta peladora de manivela accionada por taladro para alambre de chatarra

Envío gratis en pedidos superiores a Mex $600.00

Mex $803.15

Mex $ 417 .00 Mex $417.00

En stock

Acerca de este artículo

  • Artesanía de precisión: nuestra máquina pelacables está meticulosamente hecha de aluminio reforzado, mientras que las cuchillas están hechas de acero de aleación duradero, asegurando una resistencia al desgaste duradera
  • Funcionamiento versátil: esta herramienta de pelado de cables se puede operar manualmente con el mango ergonómico o conectarse a un taladro eléctrico para una extracción de cables más rápida y sin esfuerzo, mejorando en gran medida la eficiencia
  • Rango de pelado de cables ajustable: con una altura de panel de entrada personalizable, nuestra máquina puede pelar fácilmente cables que van de 0.04 pulgadas a 1 pulgada de diámetro, por lo que es adecuado para una amplia gama de tamaños de alambre
  • Capacidad multiusos: ya sea que esté tratando con cables de desecho, cables de un solo núcleo, cables domésticos o cables industriales, esta máquina peladora de cables está diseñada para pelar y recuperar eficientemente los núcleos de alambre
  • Amplia aplicación: ideal para su uso en casa, así como en centros de reciclaje y fábricas, nuestra máquina pelacables es una herramienta versátil que garantiza precisión y eficiencia en tareas de pelado de cables. Herramienta pelacables de manivela para reciclaje de chatarra de cobre



Descripción del producto

Máquina peladora de alambre de cobre con taladro

James Buckingham
Comentado en los Estados Unidos el 3 de febrero de 2025
Once you get the hang of adjusting it, it works pretty well. Haven't tried it on anything smaller than 14ga wire but it does work IF you have everything adjusted correctly and don't try to rush it. I'm using a drill instead of the hand crank and if you go slow and steady the cutter wheel will make a clean cut on the wires jacket and feeding will be smooth and trouble free. No instructions included but it isn't too difficult to figure out how it works. I'm not a pro so feel this is a good value compared to the name brand tool. Only complaint is the Allen head bolts that adjust the plates, it would be much easier and faster if bolts with a wing nut head were used instead.
paul bryant
Comentado en los Estados Unidos el 25 de febrero de 2025
Much better than anticipated! Feels very durable. I'd through 10's at this stripper. No instructions but not much to it.
alexandra bueno
Comentado en los Estados Unidos el 1 de abril de 2025
Did exactly what I needed. Helped me do it in a more timely manner.
QJC
Comentado en los Estados Unidos el 16 de diciembre de 2024
Great unit for the money
Eric J.
Comentado en los Estados Unidos el 14 de diciembre de 2024
I didn’t really have great expectations of this lil fella, considering how inexpensive it is! WEEEELLL, it’s already stripped enough wire to pay for itself at least twice! I ran everything from jumper cable wire, to 8-2, and down to 14ga. Pic is just an example of what I’ve done with it so far! Biggest thing to pay attention to when adjusting for larger diameter cable, when you adjust it back to strip smaller wires be sure that the cutting wheel is centered between the 2 drivers. Otherwise it will want to cut to one side, which is bad, it still does the job, it wants to cut strands too.
Productos recomendados

Mex $1,291.05

Mex $ 555 .00 Mex $555.00

4.9
Elegir

Mex $1,455.64

Mex $ 611 .00 Mex $611.00

4.9
Elegir

Mex $2,466.82

Mex $ 1,233 .00 Mex $1,233.00

4.3
Elegir

Mex $340.56

Mex $ 180 .00 Mex $180.00

5.0
Elegir

Mex $176.44

Mex $ 102 .00 Mex $102.00

4.7
Elegir