No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Aplicaciones de vehículos
Sensor de detonación de encendido compatible con Acura: RDX 2007 2008 2009 2010 2011 2012RSX 2002 2003 2004 2005 2006TSX 2004 2005 2006 2007 2008
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
David Cardenas
Comentado en México el 11 de febrero de 2025
Muy frágil se quebró apenas se instaló
Maria AceliaGasca Villalobos
Comentado en México el 7 de enero de 2025
Pesima calidad y su acabado deL cierge en otro color ; fatal
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
M. H.
Comentado en los Estados Unidos el 10 de julio de 2024
Sensor works well, and has been working well for the past week. Its critical on this sensor that it is torqued to the correct spec for a proper reading. This can be difficult to do depending on the vehicle. For a 2nd gen CR-V, it's impossible to get a proper torque value from the bottom. That means, that in order to obtain the proper torque of 23 ft/lbs, you would need to at minimum remove the starter. Even then it may be tight so intake manifold removal recommended. 23 ft/lbs is a low spec and easily overdone beings that you must use 1/2" drive tools, or a large box wrench, to remove and install this sensor.
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Hnda CRV 2003
Comentado en Australia el 9 de mayo de 2024
Working for 3 weeks so far....
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
Eduardo Luzuriaga
Comentado en México el 22 de marzo de 2024
Excelente reemplazo de la pieza original para una 2004 Honda CRV EX. Recomendable.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
joe
Comentado en los Estados Unidos el 9 de noviembre de 2024
For the price I am so happy felt like the original in weight and size. Good quality and works perfectly. I was skeptical at first because the forms said to run OEM, but I took a gamble as it’s an older vehicle but 4000 miles and counting so far and no check engine light and my fuel economy went up as well. Don’t listen to the 1 star reviews this will work perfectly. Don’t listen to the Honda forms. You don’t need to remove your intake manifold get an 8 inch extension with a 27 mm socket and a long pair of needle nose and you can get it without removing your intake manifold you’re gonna go under it.
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Junie
Comentado en Canadá el 7 de noviembre de 2024
Nice
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Melke seiferaw
Comentado en Canadá el 7 de mayo de 2022
Hi 👋
Productos recomendados
Mex $404.00
Mex $ 218 .00 Mex $218.00
Mex $1,723.94
Mex $ 706 .00 Mex $706.00
Mex $2,143.79
Mex $ 878 .00 Mex $878.00
Mex $361.19
Mex $ 191 .00 Mex $191.00
Mex $602.89
Mex $ 307 .00 Mex $307.00
Mex $1,254.97
Mex $ 627 .00 Mex $627.00