No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Wsays - Kit de soporte de montaje para cabrestante compatible con Jeep Wrangler JL/JLU y Gladiador 2018-2023 con parachoques de metal
Compatibilidad:
Compatible con Jeep Wrangler JL/JLU y Gladiador 2018-2023 con parachoques de metal. Compatible con parachoques de acero Rubicon de fábrica.
Especificaciones:
Material: el soporte de montaje del cabrestante está hecho de acero sólido para una mejor durabilidad y robustez.
Proceso de la superficie: el acabado de recubrimiento en polvo negro es resistente a condiciones climáticas adversas y a la corrosión, garantiza una apariencia atractiva durante años.
Función:
Ofrece una posición de montaje del cabrestante en la parte delantera de tu coche. Soporte de montaje del cabrestante para uso con cabrestantes de hasta 13.000 libras. Agujeros de montaje del cabrestante: 114,3 mm x 254 mm
Instalación: fácil de instalar, con instrucciones de instalación y no requiere perforación
Georgi
Comentado en los Estados Unidos el 12 de noviembre de 2024
All U need to install it is in the kit. Look very nice and fit with the Jeep JT and Rough country winch. Easy to install.
greg Abell
Comentado en los Estados Unidos el 31 de enero de 2024
The winch plate is well made and works great with my Jeep Gladiator Rubicon factory steel winch bumper and Warn winch. It arrived very well packaged with no damage and the paint finish was excellent. Its actual weight is 28 lbs. The directions are decent. All the parts fit the vehicle great, just take some time aligning the parts and bumper holes as you tighten the bolts. I had to slightly grind out the two back holes on the factory skid plate as the instructions noted, but then it bolted on just fine. This product exceeded my expectations and is a great value and price.
ViennaDisco
Comentado en los Estados Unidos el 25 de septiembre de 2024
Mount was easy to put together and install. I did not use the lower bracket since it interferes with the sway bar disconnect. As a test I pulled about 9k lbs up a 6% incline and the mount was solid.If you wanted the lower bracket installed on a Rubicon you would need to trim the metal at least an inch which probably defeats the purpose of it.
Frank
Comentado en Canadá el 23 de julio de 2023
Had to wait a long time to receive product but it was worth it for the quality and the reasnable price. Other supplier's asking much more money.
Dwayne Squires
Comentado en los Estados Unidos el 29 de diciembre de 2023
Mount seems great but my frame was apparently not square on my new 2022 329 Rubicon. The main mount brackets did not line up properly with the frame holes. Took the frame to a machine shop and to get them to extend the bracket holes slightly. I do not think this was a problem with the mount. But it did make the installation a bit more difficult. Notice how one hole is just a hair off but the other side is a good 1/2 inch off. Again, I attribute this to the frame mounting not the product I received.It should be noted that all the other parts and holes did align. Making the holes on the main bracket a little wider would have been great. Still pretty satisfied with this product. Best price and solid mount.I will add an after picture once I get the winch actually mounted and everything put back together.
Productos recomendados
Mex $561.52
Mex $ 308 .00 Mex $308.00
Mex $1,117.16
Mex $ 592 .00 Mex $592.00
Mex $509.04
Mex $ 254 .00 Mex $254.00
Mex $510.74
Mex $ 250 .00 Mex $250.00