Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

10 Uds Sensor Termistor de 2 Pines V2 Actualización 3950 XH2.54 Termistor de Sensor de Extremo Caliente de 2 Pines para Impresora 3D Ender 3 5 Pro CR6 CR10

Envío gratis en pedidos superiores a Mex $600.00

Mex $275.00

Mex $ 143 .00 Mex $143.00

En stock
  • El termistor utiliza un cable de alta temperatura para soportar temperaturas más altas. Para la comodidad de los clientes, el cable está conectado por cable y el cliente puede rasgar el cable según el propósito. El cable de alta temperatura es dos veces más grueso que otros en el mercado y no es fácil de romper
  • Diámetro de la cabeza: aprox. 3 mm/0,12 pulgadas, longitud de la cabeza: aprox. 15 mm/0,59 pulgadas
  • El rango de medición de temperatura es de -50 ℃ ~ + 350 ℃, que puede reemplazar el termopar tipo K original para la medición de temperatura. Adecuado para la impresión de filamentos de alta temperatura, se puede utilizar con el nuevo bloque de calentamiento del sensor
  • Compatible: para CR 10S Pro, CR X, para Ender 3, para Ender 3X, para Ender 3 Pro, para Prusa I3, para Anet E10, etc.
  • Sensor de temperatura: 100 KΩ, precisión ± 1%



Descripción del producto

1010220042711-1

10 Uds Sensor Termistor de 2 Pines V2 Actualización 3950 XH2.54 Termistor de Sensor de Extremo Caliente de 2 Pines para Impresora 3D Ender 3 5 Pro CR6 CR10

YT


El rango de medición de temperatura es de -50 ℃ ~ + 350 ℃, que puede reemplazar el termopar tipo K original para la medición de temperatura. Adecuado para la impresión de filamentos de alta temperatura, se puede utilizar con el nuevo bloque de calentamiento del sensor


Diámetro de la cabeza: aprox. 3 mm/0,12 pulgadas, longitud de la cabeza: aprox. 15 mm/0,59 pulgadas


Compatible: para CR 10S Pro, CR X, para Ender 3, para Ender 3X, para Ender 3 Pro, para Prusa I3, para Anet E10, etc.

1

1010220042711-2

1010220042711-3

1

1010220042711-2

1010220042711-3


Especificación:


Tipo de artículo: sensor de termistor


Modelo: HT-NTC100K


Material de la cabeza: acero inoxidable 304


Diámetro de la cabeza: aprox. 3 mm/0,12 pulgadas, longitud de la cabeza: aprox. 15 mm/0,59 pulgadas


Medición de temperatura: -50 ℃~+350 ℃


Sensor de temperatura: 100 KΩ, precisión ±1 %


Compatible: para CR 10S Pro, CR X, para Ender 3, para Ender 3X, para Ender 3 Pro, para Prusa I3, para Anet E10, etc.



Lista de paquetes:


10 sensores termistor


TarynH
Comentado en Canadá el 22 de julio de 2024
The product worked as expected, we had no issues, the printer is working perfectly now.
Martin Meisenbacher
Comentado en Canadá el 10 de mayo de 2024
When setting up this new thermistor in Klipper, I had to use the settings for the stock thermistor which came with the Ender5s1 machine.. I may need to do more research on that. But what's important is that it held up just as good, if not better than the original rated for 300 Celsius. I like that the metal retaining tube for the inner bulb is longer than the stock part as it reaches the full way through the heatblock and therefore has more surface area contact and a resulting better accuracy. From some more recent reading though, it seems that the specific thermistor inside these pre-assembled 3D printer parts is actually a newer one to the market and if my hunch is correct, it in fact is a better component than the stock one and it's just a matter of working out the correct settings to maximize it's potential. And do not forget to use thermal paste when assembling your heater blocks! Do not forget the heatbreak-heatsink contact zone either! -- EPCOS 100K B57560G104F is what I used in Klipper to define this thermistor. It works, and you actually don't need to change anything aside from a PID tune. It seems this is a NTC 3950 100kHIC Technology thermistor and it's a matter of finding the correct syntax online. I may update this if I manage to find out more. But awesome price for the quantity you get. These may last me years.
Productos recomendados

Mex $359.99

Mex $ 165 .00 Mex $165.00

4.6
Elegir