planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

planar

Comentado en los Estados Unidos el 4 de marzo de 2025

Update after 1 week:Turns out you can disconnect the touch switch/dimmer and all the lights will turn on full brightness when it gets power, so it does work for my application where a timer turns it on and off.I would love to give this five stars but there is one issue. When I first disconnected the touch switch, the lights would flash about every two seconds. Turns out that was the transformer going in protect mode from overload and I had to disconnect one of nine strips and then it worked right. The set has 10 meters of COB and 8 watts per meter makes 80 watts and that is maxing out the 100 watt transformer. The seller says if it was running 240 volt then it would work. So you could run the full 10 meters if it never runs full brightness, or just don't use the full 10 m supplied. With that caveat, I still recommend this set, it is really nicely done with a lot of flexibility for installation. The light is really blinding at full brightness so you won't go wrong with the COB you are getting. I am using this set as a grow light spread out over a piece of plywood so I want to use the full set at full brightness. If the set had a 150 watt transformer it would be perfect and no hesitation for five stars.The support was very responsive, however we couldn't really communicate until the second day when a person who was good at English started responding and we figured out the issues, so pretty good marks on that.-----------Original review:This is operated by a touch switch and I wouldn't have bought it if I had known, I want to turn this on and off on a timer.I got it set up in an arrangement 4 ft long and I'm really pleased with it in every way except the switching. It is just as described, the COB strips are easy to work with and I like that you can make up to 10 strips on one power supply and the squeeze connectors work really well.Is there a way to set it to just turn on full brightness when the power is applied?

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Vernon Morgan

Comentado en los Estados Unidos el 5 de abril de 2025

The crimping connectors are trash. Lights are great though

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Rachel

Comentado en los Estados Unidos el 14 de agosto de 2024

This is the first time I've used one of these LED strips that you can reconnect together. They give you all the instructions to do so, but you kind have to slowly work through it. One thing is the pictures look like it's a warm, warm white, like 2700k, but it's actually a 3000k. Other than that, this is great for when you want to customize the lengths and light up sections of your led strip.

Monique Lewis

Comentado en los Estados Unidos el 1 de agosto de 2024

I love the color of the Tansanite, it’s blue with hints of purple which is what a true Tanzanite is supposed to look. Additionally , the stones were a good size. The bottom stone is a much larger stone than the top one. Also it is a natural not inhanced Tanzanite.

Customer

Comentado en los Estados Unidos el 7 de julio de 2024

Garbage.. they're so cheap looking and the company should not be allowed to sell them as real tanzanite that is a straight out line I could have done better buying earrings out of a gumball machine they probably would look more expensive than these piece of garbage. Talking about the setting left cuz it'll cost me more or waste of money go out I didn't pay that much

💍💎Mrs. DragonBlogger💎💎💎

Comentado en los Estados Unidos el 31 de marzo de 2024

They list this as real tanzanite but it’s not!

Daniel Williamson

Comentado en los Estados Unidos el 6 de diciembre de 2024