Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

15PCS Kit de Boquillas Volcano 0.4mm para impresora 3D Anycubic Vyper, Kobra Plus, Kobra Max (Acero endurecido5 / Acero inoxidable5 / Boquillas de latón*5)

Envío gratis en pedidos superiores a Mex $600.00

Mex $326.28

Mex $ 166 .00 Mex $166.00

En stock

1.Tamaño:Boquillas M6 De 0



2.Nombredelestilo:Adecuado Para Vyper Y Kobra Plus / Max


  • Tamaño de boquilla: Diámetro de entrada 1.75 mm, diámetro de salida 0.4 mm, rosca de salida M6.
  • Estas piezas de repuesto para impresoras 3D son compatibles con Anycubic Vyper, Kobra Plus, Kobra Max y otras impresoras FDM V5 V6 de 1.75 mm PLA ABS.
  • Los kits de boquillas de extrusor 3D funcionan con la mayoría de los materiales de impresión FDM, incluidos PLA, ABS, PETG, TPE, TPU, PC, etc.
  • El paquete incluye 5 boquillas de acero endurecido + 5 boquillas de acero inoxidable + 5 boquillas de latón de alta temperatura.
  • Las boquillas están fabricadas con materiales de alta calidad, paredes internas lisas, baja viscosidad y un diseño de chaflán de corte para una alimentación suave y un bloqueo mínimo.


Materiales: Acero Endurecido / Acero Inoxidable / Latón
Filamento Compatible: 1.75mm
Materiales de Impresión: PLA, ABS, PETG, TPE, TPU, PC, etc.
Tamaño: 0.4mm
Rosca: M6
Compatible Con Anycubic Vyper, Kobra Plus, Kobra Max


Robert Jackson
Comentado en los Estados Unidos el 15 de enero de 2024
This 15PCS Volcano 0.4mm Nozzle Kit is nice. It has all the nozzles you will need for various types of filament. Keep in mind with the steel nozzles you will need to raise your print temps by about 10 degrees so that the filament doesn't jam. Steel doesn't conduct and keep heat as well as brass so it cools easier and your filament gets jammed in it. You only really need the steel nozzles if you are printing abrasive materials like carbon fiber. Printing those types of filaments is usually a pain anyways as many are finicky.
Roger Appelinski
Comentado en los Estados Unidos el 22 de abril de 2024
I have several printers with volcano hot ends. I was working through some wood PLA and GITD projects and needed some hardened nozzles. I got this 15-pack from Tmypn.There are 5 each of brass, hardened steel, and stainless steel nozzles all with .4 openings.The stamped .4 on the nozzles is flipped from usual (normally they read when nozzle is hanging vertically) but I will manage.The only challenge with the hardened steel nozzles is their head is rounded, and has only 2 flat sides. That works with a small wrench to change the nozzle, but I use a torque wrench with a socket on it for nozzles. I couldn't use that here, which was frustrating. Otherwise I'm happy with these. They work well, and are quite reasonably priced.
Productos recomendados

Mex $228.90

Mex $ 116 .00 Mex $116.00

4.8
Elegir

Mex $174.42

Mex $ 88 .00 Mex $88.00

4.5
Elegir