No hay artículos en el carro
No hay artículos en el carro ATMA SUPPLY 4581EL2002C - Ensamblaje de tambor de secadora
Condición: Nuevo
Cantidad: 4 unidades.
Este kit de mantenimiento de secadora puede solucionar los siguientes síntomas:
No se puede secar en secadora.
No se inicia
Ruidos inusuales
Ruidos fuertes
Se tarda demasiado en secarse.
Fácil de instalar:
Para reemplazar los rodillos, necesitas un destornillador Phillips, una llave de 14 mm y una llave de 10 mm.
Desconecta la secadora antes de instalar esta pieza. Usa guantes de trabajo para proteger tus manos.
Este kit de reparación de secadora se adapta a la mayoría de los modelos de secadora Como DLE0332W, DLE0442G, DLE0442W, DLE1310W, DLE2512W, DLE2514W, DLE2515S, DLE2516W, DLE2532W, DLE3733D, DLE3733S, DLE3733U, DLE3733W, etc. Puedes enviarnos un correo electrónico con el número de modelo de secadora, podemos verificar que el kit se ajuste a tu modelo o no.
Este no es un producto OEM de LG. Los nombres y logotipos de LG son las marcas registradas de sus respectivos propietarios. Cualquier uso del nombre de la marca LG o la designación de modelo para este producto se realiza únicamente con fines de demostrar compatibilidad.
Charles vaughn
Comentado en los Estados Unidos el 15 de marzo de 2025
Worked great and installed easy.
Warpigs
Comentado en los Estados Unidos el 13 de enero de 2025
First time ever torn to a dryer for me. It was kind of a pain but it worked just fine. The wheels for easy to replace putting the dryer back together. That's a different story
Kindle Customer
Comentado en los Estados Unidos el 23 de enero de 2024
Part was just as pictured and was very easy to replace, saved lots of money doing it myself !!! 👍
DGeorgeC
Comentado en los Estados Unidos el 4 de noviembre de 2023
First off when working with the dryer or any other electrical appliance be sure to unplug the power cord.This roller was installed in an LG DLGX8001 gas dryer. This dryer is huge and has 6 drum rollers.On this dryer the roller that fails 99% of the time is the center roller in the front of the dryer. When this roller fails the drum is still fully supported by the two outer rollers so you can still use it. The bad roller was found when the machine was apart to replace the thermostat on the burner tube. The bearing in the roller froze up probably several years ago and during that time the bearing heated up and melted the center of the roller. In the picture of the burner tube there is a bunch of shredded rubber and metal that was flung off as the roller deteriorated over time.Replacing this roller will take you 2-3 hours or more depending on your skill level and whether you've taken a dryer apart before. Look for instructions on YouTube and some of the appliance repair sites have step by step guides.I just replaced the one roller as the other five were just fine. This center front roller supports most of the weight of the drum plus pressure from the drive belt.
Andrés
Comentado en México el 22 de septiembre de 2023
Llego la pieza completa y sin ningún problema, es la indicada y esta al 100, gracias
Paul
Comentado en Canadá el 24 de octubre de 2021
3 of 4 were fine. One was defective. Couldn't use it so replace 3 of the 4 rollers. Center metal insert was not centered properly and couldn't be tapped into place. Hopefully I don't have to go back in again to do this job again. You have to take the entire dryer apart to get to the back ones. It's a little frustrating about the roller. Otherwise they seem good quality.
Productos recomendados
