No hay artículos en el carro
No hay artículos en el carro
Descripción:
- Suelo Tom Aleación de zinc Base de tambor abierta Soporte inferior Accesorio de percusión
- Para el baterista que quiere reducir el peso y el ño de su configuración de hardware
- Fácil de instalar, duradero en
- Material: aleación de zinc
- ño: aprox. 7x5x5cm / 2.75x1.97x1.97 pulgadas
El paquete incluye:
3x base inferior del tambor
Nota:
Permita una ligera desviación de medición debido a la medición manual.
Vai Papas
Comentado en los Estados Unidos el 23 de febrero de 2024
Was short a screw so I had to rummage through spare parts to find a matching one. Might not sound like a big deal but it is if the weight of your drum relies on all of them to be there.Other than that, pretty solid product.
Larry D.
Comentado en los Estados Unidos el 8 de enero de 2024
Great for toms or floor tom legs
Rob Davol
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great piece of equipment. Easy to install if you have a basis ability using a drill and screwdriver. Fits my existing floor Tom legs perfectly.
MIKE OHEARN
Comentado en los Estados Unidos el 1 de octubre de 2023
I've broken 3 or 4 tom mounts on my PDP kit over the last couple of years (my bad from not being careful enough- I've learned my lesson). This 3-pack was affordable and works great.
Mario
Comentado en México el 20 de mayo de 2022
El producto llego con rayas en el cromado, las medidas de los orificios para los tornillos vienen unos milímetros mas separados, si el tom de piso tiene un grosor de 1.5 mm los tornillos que traen los soportes casi no alcanzan a entrar, uno de los soportes se rompió en la orilla por lo que ya el tornillo no sujeto La pieza, tuve que reducir el grosor de la madera del tom para poder ponerle el tornillo, en uno de los soportes al sujetar la pata, la mariposa también empezó a barrerse o trasroscarse, la verdad muy decepcionante la calidad, no los recomiendo para nada.
Another Customer
Comentado en los Estados Unidos el 16 de diciembre de 2022
Hardware seems OK quality. Not the heaviest, but probably adequate. Good rubber gasket. Curvature fits my 16" floor tom. In addition to being a standard floor tom, I use it in two other configurations: vertically as the centerpiece and kick of a cocktail kit, and horizontally as the kick in a pocket kit. I like the design of these brackets, because I need them to accommodate different diameters and be able to grip tightly for each of these kit configurations. The gripping grooves in the hinged jaw really do the trick.However, the mounting screws are spaced 2", center to center (NOT 2 1/8" as someone incorrectly answered in a product question). Why isn't this included in the product description? It would've been good to know, since my shells have holes spaced at 2 1/8". Also, these brackets seem designed for metal shells, because screw sockets do not extend into the shell—they sit flush with the surface. And the supplied screws are too short to reach through a normal wood shell.Since I don't know of any other similar designs out there with spacing even close to what I need, I will probably slightly enlarge the holes in my shell to accommodate these brackets, and I will track down some slightly longer mounting screws to reach through my multi-ply wood shell.Total PITA, but...whatchagonnado? Honestly sellers...would it KILL you to put complete and necessary product information in your descriptions? Ugh.
Productos recomendados
Mex $542.00
Mex $ 292 .00 Mex $292.00
Mex $294.35
Mex $ 161 .00 Mex $161.00