No hay artículos en el carro
No hay artículos en el carroAnycubic FEP Film 2 piezas para Photon overol 2/Mono4, diseño integrado, fácil de reemplazar
Christopher Anderson
Comentado en los Estados Unidos el 5 de marzo de 2025
Works fantastic. Really - this just gives you the two extra plastic frames. They are not already stretched on a frame. As an FYI - the 'from the factory' is stretched at 250 Hz (the "B" key below middle C on a piano). When I hand tightened these, they came back as a "D" above middle C. If you have a good ear, you can hit it like a drum after tightening and compare with an online piano. If not, you can record it and look at the sound spectrum with the free 'Audacity' software. But the results were far superior - I could immediately tell that my previous FEP was worn out (it came back as a lower G# on the piano - so much less tension, which is what I was seeing - delamination of the model after the supports.)
Tombombadil_05
Comentado en México el 9 de febrero de 2025
Totalmente compatibles con photon mono 4/4 ULTRA, no son ACF por lo tanto se deben cambiar los parámetros de velocidad si es que usas la version 4 ULTRA.
PilotGuy
Comentado en los Estados Unidos el 8 de febrero de 2025
My resin printer alerted me that it was time to change the film so I purchased this. I am new to resin printing and this is the first time I have changed the film. This product comes in a sturdy box, is packaged well and includes instructions. At first I thought it might not fit because it is a snug fit but after tightening all the perimeter screws on the resin tray, this product fit well. I will purchase these again when it comes time to change the FEP out.
Michael C.
Comentado en los Estados Unidos el 17 de noviembre de 2024
I love the packaging with these things. They come in a book like holder for putting them on your shelf. There is no need to find a place to store them or trying to remember where you put them.They fit the Anycubic Mono 2 without fail, and I have printed many layers on these so far.
Adrian
Comentado en los Estados Unidos el 17 de noviembre de 2024
The FEP fill works great. Easy install on my Anycubic Mono 2 and haven't had any issues. Accidently broke the OEM FEP when cleaning the vat. This FEP has held up great and with no tears or degradation of print quality.
Michael
Comentado en los Estados Unidos el 3 de septiembre de 2024
Kinda steep price
Productos recomendados
Mex $186.00
Mex $ 100 .00 Mex $100.00
Mex $571.85
Mex $ 314 .00 Mex $314.00
Mex $58.79
Mex $ 31 .00 Mex $31.00
Mex $1,711.00
Mex $ 838 .00 Mex $838.00