No hay artículos en el carro
No hay artículos en el carro2 mini purificadores
Captain Seamus
Comentado en los Estados Unidos el 17 de febrero de 2025
Printing ASA in an enclosure and didn't notice the fumes at first. When I did, I got this filter set up as a "get by" measure - but they work so well that I am digging them. They do work when plugged in (USB-C) so I can just leave it running in my enclosure 24/7.The charcoal filter does need to be occasionally changed out - mines been running close to a month now and I am noticing it starting to drop off - I did vacuum it once already, but to get the VOC control, vacuum doesn't do that.
Gerardo Gallegos
Comentado en México el 13 de febrero de 2025
Llegó todo bien, de acuerdo a la descripción, aunque con un día de retraso.
Sharon Sherman
Comentado en Canadá el 4 de enero de 2025
These air purifiers work as advertised, I use them in my 3D printer enclosure and the VOC levels are very low now when I open the the door to the printer enclosure. I would highly recommend these
Diogo Solorio
Comentado en México el 30 de enero de 2025
No se pudo cargar el contenido.
Rodrigo V.
Comentado en México el 8 de julio de 2024
son muy buenos quitan el aroma de la resina y gases de la impresora como en un 90%
F. Angel
Comentado en México el 20 de mayo de 2024
Me interesaron para ayudar en filtrar el aíre dentro de la impresora, pero a mi parecer no ayudan de mucho. No los devolví por dos razones, una que ya había pasado el tiempo de devolución y segundo, que a pesar de todo, deben de filtrar la cámara de la impresora aunque sea algo, que es mejor que nada.
Teri
Comentado en los Estados Unidos el 11 de marzo de 2024
I exclusively use water washable resin. While it has low oder, it still has a strong smell when printing. These things work wonders in taking care of that smell. I only have to use one, but assume if you use standard resin you'll want to use both. The filter is easy to replace, and replacements are reasonably priced. They have a pretty decent life span. 10kg+ worth of prints and they are still working.The only complaint I have, and why it is a 4 star is because of the battery life. They last about 6 to 7 hours, while a decent amount of time. But if you're running 36 hour printing marathons, i.e. 40k large scale warmachines, large busts, or multiple plates of anything, these can go out many times on you. While I can rotate them out, standard resin users will be faced with having to charge them. And there is no warning they have gone out other then the resin smell.A little trick I learned, they will run while plugged in. Running the cable out of the printer will cause oder to leak, so I've gone to using cellphone backup batteries. The one I have was given to me, but it adds another 7 hours or so to the time, and can charge inbetween charging the units. Just get a really short and stubby USB cable, you don't want it falling into the vat, like me.
Alex
Comentado en Canadá el 4 de noviembre de 2024
greatly reduces the smell of resin.
DRACO
Comentado en México el 28 de noviembre de 2024
La entrega fue de acuerdo al tiempo estipulado y el articulo corresponde con lo adquirido. Gracias...
Avel
Comentado en México el 5 de enero de 2024
Solo se escucha un zumbido cuando se enciende que se reduce al tener la tapa de la impresora puesta, reduce el olor de la resina también, la carga de la batería dura como 8 horas, trae cable pero no adaptador de corriente
Rudy Zavala
Comentado en México el 5 de diciembre de 2023
disminuyo mucho el olor a resina gracias a estos filtros.
Humberto Garcia
Comentado en México el 5 de diciembre de 2023
Estos filtros son "necesarios" si tienes impresora de resina, sobre todo si estan en un lugar poco ventilado, ya que la resina no deja de ser un quimico que esta ahi durante horas soltando todo tipo de particulas. Son muy silenciosos y al ser recargables son ideales.
Morgan
Comentado en los Estados Unidos el 8 de septiembre de 2023
I have to say, I am thoroughly impressed with the ANYCUBIC Mini Purifier for 3D printers. It's been a game-changer for my printing setup, and I couldn't be happier.Firstly, the claim of being "Ultra Quiet" is no exaggeration. These purifiers operate with a level of silence that you'd hardly notice they're there. My printing space used to be filled with the constant hum of my 3D printer, but now it's remarkably peaceful, allowing me to work in a more tranquil environment.The "High Density Activated Carbon Filter" is where this accessory truly shines. It effectively eliminates any unpleasant odors or fumes that can sometimes accompany 3D printing. It's reassuring to know that not only am I getting cleaner air to breathe, but it also helps prevent any potential health concerns associated with 3D printing emissions.Having two purifiers in the pack is a fantastic bonus. It ensures consistent air purification for larger or more intensive printing projects. This thoughtful inclusion has greatly enhanced the overall value of this product.In summary, the ANYCUBIC Mini Purifier has made a significant positive impact on my 3D printing experience. It's a reliable, quiet, and effective solution for maintaining a clean and healthy workspace. I would highly recommend it to anyone looking to improve their 3D printing environment. It's a must-have accessory that you won't regret investing in.
Productos recomendados
Mex $177.62
Mex $ 99 .00 Mex $99.00