Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

ANYCUBIC Wash and Cure 3, Estación de Lavado y Curado 2 en 1 de Volumen Mejorado, con Luces de Cuello de Cisne, para Impresora 3D Photon Mono 4K 2 LCD SLA DLP, Tamaño Lavado 165 x 100 x180 mm

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,378.30

Mex $ 1,094 .00 Mex $1,094.00

En stock

1.Tamaño:Wash And Cure 3.0


Acerca de este artículo

  • 【mayor capacidad escalable de tamaño】 la capacidad de la cesta de limpieza de WASH y cure 3.0 aumentó un 100% en comparación con anyyubic WASH & cure 2.0, lo que la hace muy adecuada para impresoras 3D LCD (fotocuradas) de 7,3 pulgadas o menos. El volumen del cubo de limpieza también ha aumentado a 4l, lo que satisface las necesidades de limpieza de modelos más grandes y 3D.
  • 【Gooseneck light design】The "Innovative Flexicure Gooseneck Light Design" of ANYCUBIC increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments.
  • 【Dual-layer Design, IPA Saving】The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design also maximizes the efficiency of IPA usage.
  • 【mejora de la capacidad de curado】al utilizar nuevas alineaciones de cuentas y fuentes de luz de lentes, la uniformidad de curado de WASH & cure 3.0 aumentó en un 20% * En comparación con la generación anterior 2.0. Esto llevó a una solidificación más completa y completa de todo el modelo.
  • 【tranquilo y simple】 modo doble de limpieza y solidificación, fácil de elegir con un solo clic; El modo de curado de la lámpara de cuello de ganso se puede cambiar fácilmente con un solo clic. Se puede ajustar a voluntad durante 1 a 30 minutos. Después del diseño de la estructura cerrada y la optimización del software, la máquina puede reducir efectivamente la interferencia de ruido de limpieza y solidificación y crear un ambiente de trabajo más tranquilo y cómodo.


ANYCUBIC Estación de lavado y curado 3.0 wash cure 3.0


Tombombadil_05
Comentado en México el 9 de febrero de 2025
Fácil de usar, los repuestos son faciles de conseguir.
sean
Comentado en Australia el 22 de octubre de 2024
Good little machine though when washing prints you can get wee bits of resin or cured resin that get stuck in the impeller, you will hear a clunk sound but luckily the machine kicks it back out and keeps going.The curing part is fine.
Avel
Comentado en México el 5 de enero de 2024
Simplifica la limpieza y curado de las impresiones ayudando que sea más rápido y seguro
adair molina
Comentado en México el 12 de abril de 2024
El equipo es tal como en las imágenes y funciona correctamente.
ACarlos BC
Comentado en México el 11 de agosto de 2023
Uso recina lavable en agua y no limpia del todo, al secarla con la luz se queda como manchada o algunos detalles se pierden por residuos que le quedan. Recomiendo darle una tallada con un trapo mojado cuando la máquina termine de lavar.
Moises Solórzano
Comentado en México el 11 de agosto de 2023
Muy buen producto todo excelente, lo recomiendo al 100.
Rudy Zavala
Comentado en México el 5 de diciembre de 2023
funciona muy bien, lo unico que debi comprar la mas grande ya que tengo laANYCUBIC Photon Mono X 6Ks, y la placa cabe muyyyy apenas dentro del contenedor para lavarla, pero pues lo principal del lavado de piezas funciona bien.
Adrian
Comentado en México el 18 de octubre de 2023
Funciona perfectamente, el paquete bien embalado y protegido, recomendable
Gil M.
Comentado en los Estados Unidos el 23 de julio de 2021
This machine is extremely convenient. It fits perfectly with the Photon Mono X build plate and simplifies the post processing of prints.It does its job very well. There are just some quality of life improvements I feel should have been implemented.At $250 it is a bit expensive (especially considering there is no heater) for what it is, but I haven't seen a better alternative for this size printer. I do often see it on sale though.Pros:-Washing motor is fast, and every minute or two it switches direction. Great for agitating the alcohol around the model.-Ability to angle top LED array to get top model coverage-Basket is nice and has a separate piece for placing the build plate inside-Looks great next to the Photon Mono X. Same basic dimensions and aesthetics.Cons:-In curing mode, the turntable does not rotate smoothly, causing vibrations in the print that could be an issue depending on the model geometry-The turntable and reflective sheet need to be removed for wash mode. Its annoying to need a place for them half the time (I started leaving the reflective sheet in for wash mode)-No heater. Many other wash cure stations have a heater that preheats the cure chamber, or at least heats the chamber as it cures.
Olivier Giroux
Comentado en Canadá el 8 de diciembre de 2021
So I had a small one before Elegoo. And I switched my 3d printer ton a Mono X. God the Wash n Cure Plus it's a most to have.
Kody D. Belshe
Comentado en los Estados Unidos el 24 de marzo de 2020
I have been resin printing for about a year and a half. In that time, I have tried my fair share of DIY washing and curing setups. From multiple jars of IPA to UV Lights glued onto containers, or just leaving prints outside in the sun, I’ve tried it all.I recently learned of Anycubic’s Wash and Cure station and decided to give it a try. This machine has definitely streamlined my post-processing.The machine comes with a large container to hold your IPA or other cleaning liquid, and there is an agitator blade in the bottom which is controlled by magnets to ensure a secure, leak-proof containment.You can choose 2, 4 or 6 minute intervals, and half way through the cycle, the agitator blade reverses ensuring flowing cleaner will wash your parts from both directions.The machine comes with 3 ways to submerge your parts. The first is a metal basket which you can put the parts in if you’ve already removed them from the build plate. There are also a fixed and adjustable build plate holder. This allows you to submerge the build plate so it gets cleaned at the same time as the printed part. The build plate holders are designed to fit most resin printer models, though I had to modify the diameter of the metal connector slightly to get it to hold my Elegoo Mars build plate securely.When it’s time to post-cure your parts, there is a clear curing platform that you port into the middle of the machine. After placing the piece on the platform and placing the lid over the machine, you can set it to curing mode and, like the washing mode, choose 2, 4 or 6 minute cure time. Once started, an array of UV lights is activated while the curing platform rotates 360 degrees.This machine makes the post-printing process so much cleaner and easier. No more swirling printed parts around in a jar of IPA with tongs. No more cleaning the build plate or having to use a homemade UV curing box. I would highly recommend this machine for anyone who is into resin printing.
Noah J
Comentado en los Estados Unidos el 15 de noviembre de 2020
Over all, this is a very good product. However, to cut to the chase, I prefer using an ultrasonic cleaner and a homemade UV curing chamber.Here are a few of the pros, cons, and reasons to back up my preferences.Pros:Simplicity (Two machines in one)Pretty good at washing parts (reason for "Pretty good" explained later)Amazing at curing parts (the UV LEDs are super powerful)Attention to safety (the lid is UV blocking and there is a safety switch that shuts down the machine if the lid is removed)Simple user interfaceWorks with a pretty small amount of cleaning fluid (there is an included bracket that lowers the bed to the surface of the liquid)Cons:Price (see below for further detail)Can't use both the cleaning and curing features simultaneouslyIn all, this is a very useful piece of equipment. However, let's go into further detail on a couple of the points made above. Let's start with my comment that it does a "Pretty good" job at cleaning. Though the cleaning system does a surprisingly decent job at removing excess resin from the surface of the prints, it lacks the penetrating capability of an ultrasonic cleaner. With an ultrasonic cleaner, the part gets cleaned inside and out. This is important because resin printers can't really print infill. This means that either you print with 100% infill (i.e. solid) or no infill (i.e. hollow). Because the ultrasonic cleaner uses, well, ultrasonic waves to clean, these waves can penetrate the walls of the print and clean the inside as well.And finally, let's talk price. Though this machine is pretty good at what it does, I don't think it is worth the $150 price tag (as is the price at the time of the writing of this review). I say this because of the all the other methods of doing the things this machine does (sometimes even better) but at a cheaper price. For example, I can get an ultrasonic cleaner (big enough to put the entire build plate into) for around $80 and a string of UV LEDs for $10. So, with a little DIY (to build the curing chamber) I can have equivalent capability for $60 less.In conclusion, this is an all around good machine. I believe that you can make something better, but, since this is the only all-in-one cure/wash station I can find, I would recommend it to anybody that doesn't want to mess with the DIY side.
Productos recomendados

Mex $149.00

Mex $ 74 .00 Mex $74.00

4.7
Elegir

Mex $695.28

Mex $ 319 .00 Mex $319.00

4.8
Elegir

Mex $2,004.03

Mex $ 981 .00 Mex $981.00

4.4
Elegir