No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Aopkeo, una nueva opción.
Esta es una fábrica que se ha establecido durante 13 años especializada en productos de deportes al aire última intervensión, ubicada en la provincia de Guangdong, China. Hemos hecho OEM para muchas marcas de renombre internacional. Ahora hemos traído nuestros productos aquí y registrado una nueva marca Aopkeo. Esperamos que nuestros productos te traigan más opciones.
Conector de estación de llenado HPA G5/8
Aplicación del producto: Aire comprimido, CO2, oxígeno para Paintball, Airsoft, PCP, agua de soda, escalada, buceo, etc.
Rosca G5/8
Rosca estándar G5/8 de acero inoxidable, alta resistencia, más segura y fácil de instalar.
Válvula de purga
Válvula de purga de tornillo, estructura simple, duradera y duradera.
Desconexión rápida hembra de 8 mm
Desconexión rápida hembra de acero inoxidable estándar de 8 mm, con junta tórica de respaldo.
Calibre de 6000 psi
46 mm de calibre grande, 6000 psi y 400 bar.
Junta tórica de poliuretano
El uso de poliuretano de alta resistencia como material para desconexión rápida, tiene una vida útil 10 veces la del material de uretano y se puede utilizar bajo una presión de 6000 psi.
- Resistencia a alta presión
- Resistencia a bajas temperaturas
- Buena resistencia a la fricción
- Fácil instalación
Manguera de alta presión verdadera
La seguridad es lo más importante, todas nuestras mangueras están especialmente personalizadas y pueden funcionar normalmente bajo una presión máxima de 4600 psi/320 bar. La presión de voladura de prueba es de 11516 psi/794 bar. Se puede utilizar con confianza bajo alta presión.
- Diámetro exterior de la manguera: 0.35 pulgadas
- Rosca de la manguera: 1/8npt
- Ángulo máximo de plegado: 60°
- 37 pulgadas con resorte protector
TJ Thompson
Comentado en los Estados Unidos el 25 de marzo de 2025
Worked perfectly for a scuba tank I couldn't find a fill valve for anywhere.
Ed E.
Comentado en los Estados Unidos el 24 de marzo de 2025
The PCP Diving Paintball Tank Fill Station with DIN G5/8 Refill Connector is a compact, functional option for filling scuba and HPA tanks, but it’s not without its drawbacks. Constructed from stainless steel, the unit avoids the common issue of coating flaking seen in copper alternatives, which is a definite plus. It fits standard 5/8 BSPP (G5/8) DIN threads securely, and the included 48mm high-pressure gauge (rated up to 6000psi) is accurate and easy to read. The 37-inch hose provides sufficient reach for most setups, and the inclusion of spare o-rings and gaskets is a thoughtful addition to extend the unit’s lifespan.However, there are a few design issues worth noting. The DIN screw-in knob is not stationary and tends to float, which can make threading onto a tank feel less stable than it should be. Additionally, the main body is quite small, and the spacing between the gauge and the extra hose connection feels cramped, making handling slightly awkward. Lastly, the bleed valve knob is undersized; a larger, more ergonomic design would make it easier to operate, especially when wearing gloves.Overall, this fill station gets the job done, but with a few improvements, it could be much better. I'd rate it 3 out of 5 stars.
Bob
Comentado en los Estados Unidos el 15 de marzo de 2025
So far, I have no complaints about the product itself. The threading is smooth, and matches my scuba-tank. There are no leaks at 3000psi. The pressure-gauge appears accurate enough.My one complaint is the current price of $47, if you shop around, you can find equivalent ones much cheaper.
Zachary E. Mohrmann
Comentado en los Estados Unidos el 21 de febrero de 2025
I have never been more pleased with a product I have purchased online...! Apparently, this company takes a lot of pride in the products they sell. This product was packed so well it could have never been damaged in transit, and I know how some people feel about overpackaging, but I believe that anyone buying this product would want it packaged well to prevent any damages that could be done by mishandling or with just with lack of care..Now having said that, the product itself was well made with precision and top-notch parts and was delivered with additional washers and rubber rings.. I rated it a 5 only because they did not have any thing higher..You will to be quite pleased as well I'm sure of it...!
j.staude
Comentado en los Estados Unidos el 29 de enero de 2024
Perfect fit, fast delivery, very good price, spareparts inclyded
Productos recomendados
Mex $279.90
Mex $ 139 .00 Mex $139.00
Mex $207.11
Mex $ 111 .00 Mex $111.00
Mex $1,662.72
Mex $ 831 .00 Mex $831.00
Mex $476.76
Mex $ 214 .00 Mex $214.00
Mex $854.94
Mex $ 453 .00 Mex $453.00