No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Compatible con los modelos Buick:
2013-2015 Encore L4 1.4L Turbocharged2016-2019 Encore L4 1.4L Turbocharged VIN B
Compatible con modelos Chevrolet:
2011-2015 Cruze L4 1.4L Turbocharged2016-2016 Cruze Limited L4 1.4L Turbocharged2012-2019 Sonic L4 1.4L Turbocharged2013-2019 Trax L4 1.4L Turbocharged
Ventajas del kit de juntas de turbocompresor A-Premium:
Componentes de alta calidad. Cumple o supera las especificaciones OEM. Rendimiento y fiabilidad de primer nivel
- Número OEM: 667-574, 667574
- Nota: Se adapta al modelo L4 de 1.4 L
- Atención: Para más detalles, consulta las imágenes e información del producto anterior
Ricky Crews
Comentado en los Estados Unidos el 13 de marzo de 2025
China junk does not fit not machined to proper specs. Mounting studs too long have to cut to proper length with a cut off wheel or purchase metric nuts from hardware store because barrel nuts provided will not work with studs provided unless studs are cut down.
Donald
Comentado en los Estados Unidos el 29 de abril de 2025
Got this for my 2014 1.4l chevy cruze. Worked great for all the seals. I didn't use the bolts so can't comment if they fit or not.
Customer
Comentado en los Estados Unidos el 7 de abril de 2025
Studs were to long had to use the old ones
DoC
Comentado en Canadá el 27 de diciembre de 2024
Very complete kit. Only issue is the manifold studs are a bit longer than the original. Also the copper nuts seem to “grab” the stud too early in the threading. I understand they are like that so tightening them drives the stud properly into head, but 1/2” of forcing the thread is too much. All worked out, but took a lot of patience and strength to get them all in and torqued properly.Suggestions for improvement - include a paper or card or something that describes what car/engine needs what gaskets/seals. It’s obviously a kit designed for multiple vehicles but I was not sure what gaskets/seals to use on my car. Ended up matching what I took off, but that assumes the previous person did it right.Deduct 2 stars for that, but otherwise it is a good kit.
John
Comentado en Canadá el 28 de abril de 2024
Needed to replace exhaust manifold nuts, studs and clamps, so bought this kit. Be warned that the manifold studs in this kit will not work for a 2014 1.4L Cruze. The studs are too long and also have an unthreaded section that either prevents them from being installed far enough into the cylinder head in one orientation, or prevents the manifold nuts from being able to properly seat if studs are installed in the opposite orientation. I ended up cleaning and reusing the original studs. The rest of the parts in the kit that I did use seemed to work OK, but overall very disappointed. The attached pic shows the difference between the original studs and the studs included in the kit.
Productos recomendados
Mex $99.00
Mex $ 55 .00 Mex $55.00
Mex $358.00
Mex $ 182 .00 Mex $182.00
Mex $1,571.85
Mex $ 707 .00 Mex $707.00
Mex $745.40
Mex $ 395 .00 Mex $395.00
Mex $1,699.60
Mex $ 747 .00 Mex $747.00