No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Compatible con modelos Kia
Optima 2011-2015 L4 2.0L Gas DOHCOptima 2011-2015 L4 2.4L Gas DOHCSorento 2012 L4 2.4L Gas DOHCSportage 2011-2016 L4 2.0L Gas DOHCSportage 20111-201 6 L4 2.4L Gas DOHC
Compatible con modelos Hyundai
Tucson 2014-2015 L4 2.4L Gas DOHC
Nota importante:
- Comprueba cuidadosamente el sistema compatible del vehículo antes de realizar el pedido
Construcción duradera
Esta tapa de válvula está hecha de materiales de calidad para soportar temperaturas extremas y resistir fugas.
Material avanzado
Material resistente al calor y al frío que protege tu motor (cuando corresponda) del entorno extremo
Alto rendimiento de sellado
Las piezas vienen con una junta que hace que la tapa de la válvula sea sellada de forma segura, lo que evita la fuga de aceite y la entrada de otro polvo nocivo en las válvulas del motor.
Reemplazo directo
Esta tapa de válvula coincide con la parte antigua para ajuste y función
Atención:
Por favor, utiliza el manual de taller adecuado para tu vehículo para obtener instrucciones de servicio específicas. Si no tiene un manual de instalación o no tiene suficiente habilidad para instalar esta pieza, se recomienda buscar la ayuda de un mecánico calificado.
Darla M.
Comentado en los Estados Unidos el 14 de junio de 2024
The valve cover set was complete with all needed gaskets. It lined up and fit the engine perfectly and has the engine running smooth. The gaskets it comes with are not Fel-Pro quality but are very adequate to stop any leakage of oil. The valve cover is well made and looks like the OEM part in thickness and design.Highly recommend
Al
Comentado en los Estados Unidos el 5 de noviembre de 2024
Lasted only about three weeks before it started leaking oil. Extremely disappointed—it feels like a complete waste of money. Missed the return window, so now I'm stuck having to buy a better one elsewhere.
Customer
Comentado en Canadá el 10 de noviembre de 2024
With the “check if it fits” the product was correct and installed with ease
bimmer man
Comentado en los Estados Unidos el 25 de octubre de 2023
This is an excellent product that fit perfectly on my 2010 Mazda 5. It came with the rubber gasket securely installed on cover . Before removng the old valve cover, remove the 4 coils and blow air down into the spark plug tubes if you are going to remove the spark plugs. After you get the cover iff clean the surface of all traces of old gasket. When installing, start all of the small bolts including the 4 more unexpected bolts in the middle section of the cover first to ensure perfect alignmrnt then tighten them equally. If your old valve cover is stuck pry up on it at the front edge with a crowbar - use a small wood block like a small piece of a 2 x 4 sitting on the front motor mount the pry the front edge. Uf ut does nit come off look again for hidden bolts still holding it.
Allen
Comentado en los Estados Unidos el 3 de enero de 2023
Great quality. Came with gaskets installed and new PVC valve so that was about 12 bucks you don't need to spend. It installed perfectly with tight fit. Only thing you need to add is oil cap and stand offs for the GTI engine cover. If you have a 10mm socket I recommend 1/4 inch drive this can be installed in about an hour. You may also consider new coil packs and spark plugs. You have to remove the coil packs so if you are already this far why not. The only thing that the cover does not come with is the left wire tie downs. And removing them for you old cover is nearly impossible.
Productos recomendados
Mex $2,497.54
Mex $ 1,198 .00 Mex $1,198.00
Mex $1,038.82
Mex $ 571 .00 Mex $571.00