No hay artículos en el carro

Assurant - 3 Años Mejoras para el hogar - Garantía Extendida (Incluida Garantía de Fabricante) $1500 - $1999.99

4.8 (13) Escribir comentario

Envío gratis en pedidos superiores a Mex $600.00

Mex $133.80

Mex $ 80 .00 Mex $80.00

En stock

2.Cant.:

PLAN DE PROTECCIÓN ASSURANT: La mejor opción para proteger tus articulos en caso de descargas eléctricas y fallas mecánicas, una vez concluida la Garantía de Fabrica
PROTEGE AL MÁXIMO TU COMPRA: Olvídate de reparaciones o sustituciones costosas, el plan de protección Assurant es la mejor opción para proteger los productos que más te importan sin tener que gastar de más.
PROCESOS DE RECLAMACIÓN ÁGILES Y SENCILLOS: Estamos a una sola llamada o e-mail de distancia para ayudarte a que puedas volver a disfrutar de tu producto, contáctanos en:(55) 5809 4986 o amazon.servicio@assurant.com
NUESTRA PROMESA DE SATISFACCIÓN: Contamos con una amplia red de centros de servicio en toda la República Mexicana que repararán tus productos utilizando piezas originales y mano de obra certificada. Si no lo reparamos, lo reemplazamos.
BENEFICIOS: Extiende los beneficios de la garantía original del fabricante y disfruta tus articulos para mejorar tu hogar por más tiempo sin preocupaciones.

Tu estilo de vida es muy importante para nosotros, el plan de garantía extendida Assurant es la mejor forma de ayudarte a proteger los productos que mejoran tu calidad de vida, al ofrecerte un plan de garantía extendida Assurant, tus articulos quedarán protegidos después de la garantía del fabricante así no tendrás que gastar en reparaciones o sustituciones costosas.

roy fryman

Comentado en los Estados Unidos el 17 de enero de 2025

Run this on A1 texture plate ...bambu tpu 95 filament setting... Not a fast print prints really good ...Printed high height with little support had small moving but still held together ..very forgiving.. prints really really good filament

Jeremy Shook

Comentado en los Estados Unidos el 16 de agosto de 2024

This is easy printing(especially for tpu), consistent, neatly wound up, smooth, strong and just simply put high quality. Also their forest green filament displayed in the pictures is extremely accurate to the actual color. I use TPU alot and over the years I've tried dozens of brands. There's really only one tpu brand I buy from with confidence of excellent quality (yousu) but they don't have every color I want/need. Priline prints just as well (exactly the same actually) with the same consistent color, quality, durability and ease of printing as yousu. These guys are the cream of the crop for tpu hands down. I've already used up the first spool with no problems at all and I just ordered more a week later. I should also mention, I don't print tpu like what everyone recommends, I print it with Bowden and direct drives and I print it hot as hell (245-255°c) and fast af boy (70-140mm/s save first layer at 35mm/s). These settings are not recommended by anyone or any brand for tpu. It's just how I've learned to print tpu with the best results but it helps to have a good product that keeps up with reliable consistency. My prints are clean and smooth. Never a jam. Thank you priline for the wonderful product. Keep it up

Nick

Comentado en los Estados Unidos el 29 de octubre de 2024

Really fun stuff to work with. Being flexible, you should adjust your settings a bit and dry it, but works great and looks great.

Larry

Comentado en Canadá el 24 de junio de 2023

Not used yet

Seth

Comentado en los Estados Unidos el 22 de febrero de 2023

I was surprised how well this worked with my CR6-SE with a bowden extruder. I run it a bit hot like with most filaments to optimize layer adhesion strength, but this stuff started bubbling at 225c. I dried it at 65-70c in my toaster oven for 4 hours and the prints came out much better. I used stock settings except for an upgraded dual gear extruder.50mm/s at 230c for infill and inner walls25mm/s for outer walls8mm retracts at 80mm/s0.4 nozzle,0.4 Layer Height0.6 line widthIt worked just fine, but I was not printing intricate parts, otherwise I would likely have to slow it down A BIT. I didn’t play with retract settings at all, but I did notice some stringing that would be an issue with some parts, but not the vice clamps I made.It does help to minimize retracts. To do this I Used Infinite walls rather than solid infill. If using infill, the “cross” infill in the Creality slicer minimizes retracts as well since does an entire layer of infill in one line.A dual gear extruder is a great addition for the price point if you still have the crappy Jack in the Box extruder that comes with some Creality printers, get rid of it. Its the best $15 upgrade you will ever make. This one works great with all filaments I have tried including this one.https://www.amazon.com/gp/product/B09H6T3NNTUpdate. Printed a bushing for my 2002 BMW M5 differential mount. Slightly stiffer than stock rubber bushing. Works well so far. Let’s see how it holds up.

Paula Sánchez