No hay artículos en el carro
No hay artículos en el carroMás información del producto
Fleetrunner - Correas microV resistentes
Diseñado para las aplicaciones más difíciles, la construcción FleetRunner proporciona una flexibilidad, estabilidad, capacidad de carga superior y una vida útil de la correa sin igual. Los materiales patentados ofrecen un rendimiento máximo a temperaturas extremas de funcionamiento prolongadas, lo que hace de esta correa el último solucionador de problemas. Una mezcla avanzada de tecnología de caucho EPDM resiste las amenazas modernas de deterioro por una mayor exposición al aceite, ozono y refrigerantes a base de agua. FleetRunner hace todo esto mientras proporciona el menor costo por milla para las flotas, incluidas las camionetas de ¾ y 1 tonelada.
Características:
- Dura 4 veces más que otros cinturones de posventa
- Dura un 34% más que las correas OE
- Resistencia superior a las altas condiciones de calor de los motores diésel modernos
- El costo más bajo por milla
Sergio Martin Pineda Gomez
Comentado en México el 1 de agosto de 2024
Está muy bien el producto muy recomendado para comprar….. entrega en tiempo y forma
K. G. Hornet
Comentado en los Estados Unidos el 8 de junio de 2024
Although the liner has been serviceable to date, I was hoping for a bit more thickness to the material. The fabric is a woven thin canvas type material with a thin rubberized coating applied to the back of the fabric. Other than that it is was easy to install and the velcro tape accessories make this easy to adjust and shape to the contours of my compartment. A bit better than 4 stars but not a 5 star rating.
Carlos
Comentado en México el 24 de febrero de 2024
No es funcional, el material sintético no me agrada, no es versátil, no me sirve para la Pajeo o Montero Sport, no es universal, NO LO COMPREN, el precio es muy alto, por lo que recibes
Lilia Patricia
Comentado en México el 8 de diciembre de 2024
Muy práctico , de muy buena calidad
Alexis
Comentado en los Estados Unidos el 11 de diciembre de 2024
Have used and have had no squeaks since! these are the best!
Mike
Comentado en los Estados Unidos el 29 de octubre de 2024
O.E.M. Parts are the only way to go.There is no substitute for quality parts.
Luis miguel
Comentado en México el 29 de agosto de 2023
Sencillo de instalar
Doc
Comentado en los Estados Unidos el 30 de mayo de 2023
Not sure why the back of the belt is green but it seems like a quality belt. Replaced this along with the tensioner as the recommended doing both at the same time. See my review on acdelco 38159 tensioner pulley. It’s probably made by gates or the same as the gates tensioner.Surprised my old belt was still working without any issues. It was severely cracked.My 03 burb has the mechanical fan so this would prob be easier on a truck with electric fans = more room.Easiest way to install for me was remove intake tube. Remove main serpentine belt. Remove ac belt and then remove the two 15mm bolts that hold the tensioner on. I did this from the top of engine as my burb is z71 so I’d have to remove skid plates to get to the tensioner from bottom.Best way to install new ac belt is to put it around the crankshaft pulley first then put your 3/8 ratchet on the new tensioner and move it all the way to the right (tighten) until it stops. I then was able to easily slide the new belt over ac compressor while it was already on crank pulley. Let off tension on tensioner, removed ratchet and reinstalled main serpentine belt along with intake tube.
Ol' Reg
Comentado en los Estados Unidos el 24 de noviembre de 2023
I bought a new SUV and, as with the previous SUV, wanted a liner for the back seats as I keep my golf clubs back there all the time and haul stuff from big box home repair stores.I was unsure if there would be Velcro strips but there are and the sides are just right for protecting the wheel wells and the strips stick nicely to the rear carpeting and seat backs. There are also elastic straps to go around the headrests of the forward rear seats. A good buy.
juan diaz
Comentado en los Estados Unidos el 7 de octubre de 2023
What can I say, works as intended and is not super tight. Fights just as stated on my 2005 Silverado 5.3 with 105a amp (which was swapped to a mechman 240a and still fits perfectly.
Chelsie O'Connor
Comentado en los Estados Unidos el 6 de octubre de 2023
Great quality, and a little smaller than factory drive belt for my upgraded mechman alternator. Very happy with purchase.
Anny
Comentado en México el 23 de enero de 2023
El material es muy básico, la publicación es confusa en cuanto al mismo, pedí el de más de 700 pesos, pero ahora que lo veo, no se entonces de que tipo de material sea el que es de más de 500, supongo que nada duradero.
Kelly
Comentado en Canadá el 4 de julio de 2017
Easy to put on and it stays put. If it was made just a little bit larger it would fit my seats that much better. As it is it's a good price for a good product.
Ken
Comentado en Canadá el 24 de junio de 2017
this is an awesome product the only thing that is a surprise and somewhat disappointing is that Harris sticks to it.it's very well as comfortable looks good. it is easy to use it's easy to put on and take off.You just think they would have went the extra mile to make it so that dog hair doesn't stick to it.It is a car seat cover for dogs after all.now that I think of it the material is a little slippery for the dogs too when it comes to breaking in the dog is looking to brace itself ... it's too slippery for foo foo to get his grip.
Ronald Epstein
Comentado en los Estados Unidos el 7 de septiembre de 2015
Recently adopted a small dog and wanted to take her with me on trips.I own a luxury vehicle and the last thing I wanted was for my pet to destroy the front bucket seat.The Alfheim dog cover is perfect for my needs, although I was also considering the KIRGO cover which is much more expensive. Glad I stuck with this brand.It comes with absolutely no instructions but it's quite elementary to figure out how to install. There are two straps on the cover. The first (at top) goes over the headrest and fastens with one loop going in the bottom slit and then through the top. Pull to lock. The second (in the middle) fastens in exactly the same manner.The bottom skirt fits perfectly across my rather wide-bottom 2016 Lincoln MKX seat.The seat cover seems to be made of durable material. It isn't bulky, and really, doesn't look that out of place that it cheapens the look of my interior. If I have anyone riding with me in my vehicle, it seems a "snap" to remove the seat cover.If there were anything different I would prefer about this seat cover would be plastic buckle fasteners (for easy connect and disconnects) rather than having to manually loop the strap through two slits -- which I can see being a real pain-in-the-neck if having to continually remove and install this seat cover.Oh....and if you have taken the time to read this review and make it to this point, a little extra surprise for you (and apparently ME): There is an included pouch to store your seat cover when not in use. Niiiiiice!
Productos recomendados
Mex $742.39
Mex $ 378 .00 Mex $378.00
Mex $314.93
Mex $ 157 .00 Mex $157.00
Mex $384.47
Mex $ 184 .00 Mex $184.00