No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Solo se adapta a Ford Bronco Sport First Edition Badlands 2021 2022 Off-Road con rieles empotrados
Diseño aerodinámico
Cuando conduces, el coche aerodinámico minimiza la resistencia al aire, creando una experiencia de viaje completamente silenciosa.
Aluminio de alta calidad
La viga del techo está hecha de aleación de aluminio, que es fuerte y duradera. Impermeable, anticorrosión, puede adaptarse a todo tipo de clima extremo.
Mantener el espacio libre en el techo
Se adopta el diseño de fábrica, que es más adecuado para el modelo. Y no hay problema de bloquear el tragaluz. Haz que tu coche sea más hermoso y moderno.
Capacidad de carga de 270 libras
Soporta de forma segura el peso de la carga de hasta 120 kg, y no dobla ni distorsiona la integridad estructural de la baca de techo. Presta atención a las restricciones de peso. La capacidad máxima del sistema de baca dependerá de la parte nominal más baja del sistema.
Disfruta de viajes al aire libre, AUXPACBO está contigo,
Greg & Michele Owens
Comentado en los Estados Unidos el 24 de febrero de 2025
Fit great. Sturdy construction. Easy install.2025 Ford Bronco Sport (OuterBanks)There is a discrepancy between the product description and the instruction materials on the weight load limit. Product description says these are rated for over 250 pounds. The paperwork that comes with it says 165 pounds.I’m going to keep them because they feel super solid and I’m confident they will hold my cargo box safe safely
Henry Gernhardt
Comentado en los Estados Unidos el 25 de julio de 2024
The main problem, after figuring out there were small underside slots (spring loaded or similar), 2 on each side rail of my Bronco Sport Badlands that the cross bar clamps had to fit into, was the fact that the tightening clamp screws were too short to easily find their threaded hole while simultaneously trying to squeeze the clamp into the slot. It took hand strength to squeeze and good eyesight to find that hole, then get the screw threaded. The solution to my problem: the 4 threaded rail clamp screws (one in each crossbar) need to be at least a half inch longer. Other than that, this is a VERY NICE, highly usable all-metal set of crossbars that produce virtually no wind noise. Recommended!
Customer
Comentado en los Estados Unidos el 3 de diciembre de 2024
The product is solid when installed and provides a more final look. Took about 2 1/2 hrs, which could have been reduced by 45 mins + if I had not tried to use a wrong screw to seat the first support bracket🤪.As previously noted the instructions aren’t very clear and came titled “ For 2020-21 Ford Bronco Sport”. Mine is a 2024 Outer Banks! Not to be deterred, I plodded ahead!Start with one bracket support. They are clearly marked “forward” and on each of the four interior boxes is a L or R for the correct side.Remove the screw holding the inside portion of the bracket and keep it nearby. Find the slot on the undercarriage portion of the rail and insert this inner portion of the bracket. Slide the top/outer portion on the inner portion, keeping this slotted piece stable with a finger/hand under the rail. With some wiggling you can put the screw you removed back into the bracket and loosely tighten. Finish tightening when you complete the opposite side.Take whichever rail you are installing first and remove the two screws on the bottom of the side you are working on. Seat the rail into the bracket and reinstall the two screws.Go to the opposite side of your BS to install the corresponding bracket for the rail you just inserted. Remove the screw holding the two pieces of bracket together. Insert the rail into the bracket and seat as on opposite side.Insert two screws on bottom of the rail and tighten. Return to the other side and tighten the two screws on the bottom of rail.Repeat for second rail assembly and Voila you new snazzy carrier is installed. I hope this helps!
Customer
Comentado en los Estados Unidos el 26 de noviembre de 2024
Well, I love it. Took me about an hour to do by myself. I tried only reading half of the instructions, when that didn’t work I watched the installation video. Once I did that, it was fairly easy. It looks great! Seems sturdy, we shall see once we get on the road. Honestly I think it’s a great value.
Beverly
Comentado en los Estados Unidos el 2 de noviembre de 2024
These are exactly like the OEM Ford brand. At $136 versus Ford at $350 these are a bargain. They are well made and powder coated. Fit perfectly. There are notches under the rails and that is where they go. Easy to install except for inserting the screw in the top of all the mounts. The screws are a little too short so you have to work at it to get the mount seated and the screws lined up. Be patient and work at it. You cannot. go wrong with these.
Productos recomendados
Mex $2,625.14
Mex $ 1,155 .00 Mex $1,155.00
Mex $3,265.44
Mex $ 1,371 .00 Mex $1,371.00
Mex $2,894.64
Mex $ 1,389 .00 Mex $1,389.00
Mex $1,693.06
Mex $ 711 .00 Mex $711.00