No hay artículos en el carro
No hay artículos en el carroPodemos hacer cables personalizados
Sabine Jette Baumeister
Comentado en Alemania el 11 de marzo de 2025
Funktioniert 1a für einen Field Monitor
Andre
Comentado en los Estados Unidos el 25 de agosto de 2024
Works as described. One Female 5.5x2.2.5mm plug to receive power and another 5.5x2.5mm female jack to pass power along. I use one NP-F battery to power my camera, field monitor and wireless transmitter via a power junkie (Although there are many NP-F plates on the market).Using a new NP-F970 clone (8800 mAh) I was able to run my rig in constant record/transmit mode for about 1.5 hours. I am sure I can stretch another 1/2 hour to 45 min with some of the newer 10k mAh batteries on the market. This configuration will burn through older/less efficient batteries in less than an hour. Some of my older batteries (> 6 years) didnt last 1/2 hour. Since I never record in full 1 hour spurts, this should probably last 2-3 hours in standard record/pause mode w/good batteries, and longer if I do not wirelessly transmit.These connectors are excellent for those consolidating to an NP-F battery strategy. I have purchased three in total, as I also use one on my gimbal.Advice - understand the wattage draw from each of your devices. These plates usually cannot handle more than 20w consistently with a peak of about 28w. Stringing together too much stuff may cause problems.
Alan Longer
Comentado en Francia el 25 de julio de 2024
Produit excellent en présentation et en performance.Complètement satisfait de mon achat
Enns
Comentado en Alemania el 14 de mayo de 2024
Gut
Productos recomendados