No hay artículos en el carro
No hay artículos en el carroBIQU Panda Build Plate CryoGrip Pro Glacier 257 x 257 mm para impresoras 3D Bambu-Lab P1P/P1S/X1C/A1 de doble cara, materiales especiales, placa de construcción, plataforma de superficie extraíble
D Toronto
Comentado en Canadá el 15 de marzo de 2025
I wish I got this sooner. I was having problems with PETG sticking too well. This plate said 8/10 for PETG and PLA. Everything prints great and it's very easy to remove afterwards. So far I have used PETG, TPU and PA6, zero warping. I don't think I'd buy another PEI plate after using this one (Bambu P1S)
Gordon
Comentado en Canadá el 15 de marzo de 2025
3 prints in holds great printing ABS, but has a section where the coating pealed off, probably oil on the plate when it was coated, I would like a replacement, great adhesion for the parts, was disappointed when the coating came off had great high hopes.
ThatGuyWhoLikesStuff
Comentado en los Estados Unidos el 23 de febrero de 2025
Works very well for adhesion and a great replacement in comparison to the OEM textured PEI bed. While I like the aesthetics of the plate, it is a shame that the nozzle wipe on the rear wasn't accounted for by BIQU (maybe a silcone strip?). While using this plate, similar to the OEM plate, everytime the nozzle does a wipe before a print, it strikes off some of the plates coating. I've releveled my printer numerous times and know this is a common aspect however it's something I think BIQU could have worked to upgrade/incorporate!
Michael
Comentado en los Estados Unidos el 2 de enero de 2025
The quality is great but throughout a couple days of using it literally nothing sticks to it and I get horrible. First layers. I’ve been 3-D printing for about five years and I’ve never had a bed do this on me I’ve washed it with soap and water. I’ve wiped it with alcohol. I’ve recalibrated my printer. I’ve redone flow rates. I’ve played with temperatures and yet I cannot get PLA or PETG, which is mainly what I print in to stick to the bed and to get a perfect first layer. I’m not sure what’s going on, but it is very disappointing for how expensive these build plates are i’ve talked to other people who have these build plates. Some have amazing experiences with them, and some people are in the same boat as I am. I also just ordered the frostbite variant to see if this issue arises with that build plate if it does, I will 100% be returning both build plates. I’m pretty disappointed with the performance of these build plates.
Dave Cruickshank
Comentado en Canadá el 2 de diciembre de 2024
My first print on this plate was a fail (print lifted off the bed)... I realized that after hundreds of successful prints on my PEI bed... What do I need a blue, cold bed for? There's only a 20 degree difference in recommended temperature between this and PEI. No real benefit. Returned.
Productos recomendados
Mex $251.00
Mex $ 150 .00 Mex $150.00