No hay artículos en el carro
No hay artículos en el carroINTRODUCCIÓN La mayoría de los televisores modernos tienen conectividad a través de HDMI y carecen de algunas de las entradas más antiguas como componentes, SCART y compuestos que suelen utilizar las consolas retro. Con el adaptador de escalado compatible con Bitfunx GC a HDMI, puedes darle a tu antiguo NGC una nueva vida y hacer que se vea mejor que nunca corriendo a través de tu moderno televisor HD/4k. El adaptador de escala Bitfunx GC a HDMI también es plug and play, por lo que es sencillo y rápido de usar.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
jessie campbell
Comentado en los Estados Unidos el 17 de marzo de 2025
these adapters all pretty much have the same hardware and software it works as intended and displays wonderfully on a tv with hdmi.
Elizondo
Comentado en México el 5 de febrero de 2025
Estas bolsas transparentes en rollo son prácticas y funcionales para usos generales. Su presentación facilita el almacenamiento y el desprendimiento de cada bolsa, lo que las hace convenientes para el día a día.Sin embargo, la resistencia no es su punto fuerte, por lo que es importante no exceder su capacidad para evitar desgarros. Aun así, considerando el precio, la relación calidad-precio es justa.En general, una opción económica y útil para almacenamiento ligero, siempre que se tenga en cuenta su nivel de resistencia.
JULIO
Comentado en México el 26 de enero de 2025
Son muy finas. No sirven para nada.Es más. Al querer cortarlas se rompen.Amazon no debería permitir vender productos así con tan mala calidad.
ricardo
Comentado en México el 17 de enero de 2025
rollo de bolsas de plastico de calidad regular, se batalla para separar las bolsas, la calidad de la bolsa es aceptable
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
T.N
Comentado en los Estados Unidos el 19 de abril de 2025
Be careful, this will only work with GameCubes that have the digital output port model DOL-001. So, make sure your console is compatible.With retro gaming back on the rise, I wanted to start playing my GameCube again, but I wanted to see if I could use HDMI instead of the composite cables. I searched for a while, and other adaptors out there were pricey, and the same with mods. I saw this and wanted to give it a try. I am glad it did, as it allowed me to be able to use my retro console on modern TVs. Do have realistic expectations that this won't magically make things into native 1080p or 4k, but it does do a good job of making things look good on modern TVs. I would say if you are looking for absolute crisp video adaptors like this will not be able to do it, but this is good for folks who want a plug-and-play solution and use modern TVs.
Mike
Comentado en los Estados Unidos el 28 de abril de 2025
Works without issue if you're running a stock gamecube. Has some caveats if you're using a picoboot hard modded gamecube wired to 3.3v. rail.Device takes excessive power draw at boot from 3.3v rail and will prevent the picoboot modchip from booting if wired on 3.3v rail. This should not affect Picoboot users wired to 5v rail. The adapter does work but I found I have to either boot the console with the adapter disconnected or my tv powered off and then power the tv on once the boot cycle completes to allow the modchip to properly function. If you power the console on with the tv powered on while the adapter is connected it will not boot the modchip bios and instead boot into the retail bios
FLORY PEDROZA
Comentado en México el 31 de agosto de 2024
Buenas para lo que las compre cubir jaulas de pájaros. Y para botes de papeles de baño.Para otra cosa no pq son hipet delgadas no aguantan nada de peso, solo es digamos para cubir yo para eso lo compre.
Juan Francisco Lopez Velasco
Comentado en México el 29 de febrero de 2024
Por ser biodegradables son delgadas pero aguantan. El valor beneficio esta perfecto. Recomendables 100 %
IrmaIsabel
Comentado en México el 16 de noviembre de 2024
Son muy delgadas, se rompen con facilidad
selene v.
Comentado en México el 14 de agosto de 2023
Me gustaron mucho, son delgaditas como las que hay en el súper para echar la verdura, yo las quiero porque me piden bolsas en la guardería para echar la ropa sucia del niño, ya usé varias y no se rompen, vi en otro comentario que se rompían pero no me pasó eso por suerte, es un rollo grueso
angeles conchouso romero
Comentado en México el 18 de marzo de 2023
Me gustó todo. Lo usamos para pequeños botes de basura en habitaciones, en los baños. Gracias
Productos recomendados
Mex $136.00
Mex $ 73 .00 Mex $73.00
Mex $191.00
Mex $ 108 .00 Mex $108.00
Mex $241.98
Mex $ 137 .00 Mex $137.00
Mex $160.74
Mex $ 88 .00 Mex $88.00