No hay artículos en el carro
No hay artículos en el carroEstilo:11# Cucharilla | Tamaño:0.035 E71T-1/1M is an all position, flux cored welding wire, which is intended for single and multiplepass welding of low-alloy and carbon steel where a minimum 70ksi tensile strength and good notch toughness is required.
james perkins
Comentado en los Estados Unidos el 25 de marzo de 2025
Great weld wire!
Noah Berger
Comentado en los Estados Unidos el 5 de enero de 2024
Product welded fine in flat and overhead positions however in the vertical up position I encountered extreme porosity to the point I had contacted blue demon and they were no help at all. They questioned my base material and welding machine multiple times even after troubleshooting. I switched in a spool of wire from another manufacturer and it ran perfect, along with hard wire, so I know my gas welder and all other parameters were correct, this wire is absolutely garbage. I weld for my own business everyday and I cannot deal with substandard manufacturing. Will never use a blue demon product again. I'd heard only good things but I guess they pay for that reputation. Service Representatives have no idea about welding procedures in the slightest. Only by vacuum sealed wire as it has a much longer shelf life and you never know how long it's been sitting. Also plastic spools cannot be rebaked so this wire is garbage as I cannot risk the integrity of my jobs to a substandard consumable.
Rick
Comentado en Canadá el 5 de noviembre de 2019
Doesn't weld vary good never buy it again you get what you pay for I guess thought I'd try it but no good alot of slag from id and getting a vary poor weld
tim long
Comentado en los Estados Unidos el 24 de enero de 2019
This wire runs perfect in my Vulcan Migmax 215. I weld 3/16 mild steel with machine set on F-7.2. It runs smooth and spatter-free. And no, the machine is not maxed out. If you have a migmax 215 and want to weld smooth an nice hot welds, this is the wire for you. I am running 75/25 gas at around 27cfh. I am very impressed with the way it burns in. For the price this is excellent wire. I also have a Lincoln sp175 plus that I am thinking of trying it in. This wire is like a 7018 rod. Welds are ductile and easy to run. If you work on trailers, you need to use this stuff. It makes nice looking and stronger welds than solid wire. Bead appearance is smooth and flat. Slag is light and easily removed. Just a great wire for the around 200 amp class of machines.
Ian
Comentado en Canadá el 5 de diciembre de 2018
I have used gasless flux core and mig and am trying this wire with a dual-mix on various small fabricating and repair projects. It's a bit of a learning curve of course but so far it works great. I have done some cut and etch and test bends and it is every bit as good or better than the gasless flux core without the smoke. Highly recommend this product at a great price Update. I have used several rolls now and very happy with the results. You definitely need a wiper on the wire as there is a bit of a black oily looking residue, probably corrosion protection. I use folded microfiber cloths cut from Dollar store washcloths fastened with spring clamps. Make sure the tip is in good shape with no wear. Unfortunately it's apparent some people only read "Flux Core" and ignore the " GAS SHIELDED " part. Used as designed it works great!! It DOES NOT work well without gas or proper voltage and wire speed set up!!
Productos recomendados
Mex $335.00
Mex $ 180 .00 Mex $180.00
Mex $8,437.00
Mex $ 1,881 .00 Mex $1,881.00