No hay artículos en el carro
No hay artículos en el carro Especificaciones del producto:
Material: carcasa de aluminio (material interior: varilla de cerámica y arena de cuarzo).
Potencia nominal: 100 W.
Valor de resistencia: 2 ohmios.
Tolerancia de resistencia: +/- 5%.
Tamaño total: 85 x 20 x 15 mm.
Contenido del paquete:
5 resistencias enrolladas.
Adaptado a: Nest Hello Doorbell, y transformador, fuente de alimentación, luz LED de coche, transductor, audio, convertidor de frecuencia, divisor de frecuencia, ascensor, audio de arena y otros equipos de alta exigencia.
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
Richard Frick
Comentado en los Estados Unidos el 18 de marzo de 2025
Work great. Used for the LED lights on my truck. Much better than the 50w
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
David R.
Comentado en los Estados Unidos el 9 de febrero de 2025
Modifying a resnor shop heater and needed to slow the fan. These worked great. Used 3 in series to get 6ohms. Mounted on the fan grill to keep cool.
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
john d
Comentado en los Estados Unidos el 25 de febrero de 2025
very nice package
kayak1
Comentado en los Estados Unidos el 28 de julio de 2024
The 2nd Card and the EZ Share Wi-Fi network never becomes visible.The idea is great, but I question if this card is just a scam without any active electronic in it.
DM
Comentado en los Estados Unidos el 20 de mayo de 2024
Doesn’t work and you will not get any help from seller. seller will tell what card is for and to download app, which I already had done. The second time they contacted me they told me to repair the card. How ever the card does not appear to be seen by any WiFi signal. The make matters worst I ask to send back for refund I will have to pay out of my pocket.
Nasser
Comentado en los Estados Unidos el 20 de octubre de 2024
This product doesn't work and there are little to no instructions included. It is supposed to broadcast a WiFi signal but there was nothing I could pick up on my phone or laptop. I could not find a manufacturer website on Goolge search for either EZ Share or Zyyini.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
jeremy
Comentado en los Estados Unidos el 4 de septiembre de 2024
My truck ('17 Colorado) has double turn lights per side in the back that pig tail from the same wire so this made it possible to install one per side (2 total) vs one per light (4 total) they work as they should.Only 4 stars because they dont come with a wire already attached like all the others do, kinda lazy if you ask me. Im good with a soldering iron so i attached a wire myself, no big deal, but found if you take too long to tin the leads the insulation will melt and the post will rotate. Not sure if they killed the resistor i ended up just setting that one aside as an extra but still bugged me.
Gadget Warrior
Comentado en los Estados Unidos el 12 de enero de 2023
The card did not work with my Sony Camera. No instructions. When it was plugged into a computer, I could use the WiFi functionality only using my Android phone, so you're limited to just the App. I could access the SD card's drive from another computer. I was able to connect to it as an AP, and I changed it to work in STA mode. I was able to see it on my network, but the card would frequently disconnect until it would no longer connect at all (within a span of 5 minutes). It's a terrible product; a huge waste of time; little development was put into it and is therefore not user friendly. NO INSTRUCTIONS.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Killian
Comentado en los Estados Unidos el 15 de agosto de 2022
Liked it? More like lived it! Geeez whats with all the questions? Great product that i plan on buying more of. Top that with a smiling and polite delivery driver that was early might i add snd it doesnt get better than that.
Chococat
Comentado en los Estados Unidos el 8 de diciembre de 2022
I bought this product in the hopes of adding wifi to a Nikon D810 after my D850 broke. The D810 is of course now an older model although still with outstanding image quality--but it lacks the wifi of the newer models. I couldn't find much in the way of reviews on this adapter but since it's inexpensive I figured there wasn't much to lose. Turns out it works great. But one thing that isn't explained anywhere (and actually very little is explained with this item), to get it to work I need to keep the camera active. As in something on the screen. If the camera isn't actively displaying something the wifi signal will drop. I don't know enough about tech to know exactly why, but somehow keeping the camera active is also keeping the adapter and its signal active. So that's an important tip because otherwise this thing will simply cause frustration, connecting to my phone but then dropping signal before I can transfer anything. So I keep a photo on the camera's screen when I'm using the wifi, and this adapter really does work well. One other thing that isn't mentioned is that there is an app for the wifi transfer. On the package itself is a scanable code, if you scan it with your phone you'll download the app, without which the adapter is useless, you can't transfer via the wifi alone, you need the app. The app is extremely simple but again it functions well, simple but does what it needs to do.
Productos recomendados
Mex $327.89
Mex $ 147 .00 Mex $147.00
Mex $212.15
Mex $ 127 .00 Mex $127.00
Mex $116.31
Mex $ 62 .00 Mex $62.00