No hay artículos en el carro
No hay artículos en el carro
Material: acero inoxidable 304.
Capacidad: este filtro contiene aproximadamente 16 gramos de polvo
Adecuado para máquina espresso: Breville, Delonghi, Krups, Barista, Mr. Coffee, etc.
Diámetro interior: aprox. 51 mm.
Diámetro exterior: aprox. 52,7 mm.
Altura: aprox. 36,5 mm.
Peso: aprox. 20 g
Doug D
Comentado en los Estados Unidos el 19 de enero de 2025
This basket is higher quality with finer holes than the basket that came with the cheap 51mm bottomless portafilter (Ladieshow brand 😂) I purchased to use with my DeLonghi ECP3630. It’s also slightly less messy than the basket that came with the Ladieshow bottomless portafilter but it’s also slightly smaller, only about 1g.I originally bought this basket to attempt to use it in my stock DeLonghi ECP3630 but that didn’t work. This basket DOES NOT fit a DeLonghi ECP3630 portafilter without modification. A review stated it worked in their ECP3620 but I don’t see how that’s possible since both use exactly the same portafilter. The basket fit into the ECP3630 portafilter however there is a black plastic piece inside the portafilter that keeps it from going all the way in. Without removing the plastic piece or cutting the plastic insert down you will not be able to fit this basket into a ECP3630 stock portafilter. This is explained in the product description so obviously not holding it against the product… I just took a chance on that one review.I did try using it with the black plastic piece from the portafilter removed which did work but created a ridiculous mess, I don’t recommend doing that.
Mick
Comentado en los Estados Unidos el 2 de junio de 2024
Works perfectly in a Millenium La Pavoni. Perfect when pulling multiple shots.
Bob
Comentado en los Estados Unidos el 8 de noviembre de 2024
Seems to work perfectly in my old Cuisinart expresso machine. Doesn't have the problem of removing the filter from carrier to clean it... my old Cuisinart filter was DIFFICULT to clean. At the moment, I am a happy customer
Maleko
Comentado en los Estados Unidos el 4 de enero de 2024
This fit exactly in my generic ilavie 20bar espresso maker. slides in and out super easily, it's an exact fit. It might be just slightly a few mm deeper then the stock 2 cup pressurized cup that came with the machine. It says 18grams. I weighed the amount of coffee i normally put in normally and in my stock cup which is 13grams, this cup i put about 15grams with still 3mm at least spacing on top. Whenever i watch the espresso youtube howto shows, they seem to use a non pressure about 15-18gram 2 shot cup, and it always looks rich with a lot of crema (foam). When i used this on my machine, the coffee/espresso looked nice and rich but with actually less foam then my pressure type cup. Not that it tasted bad, i think maybe this flows much faster so it flows through faster before it gets bitter? It tasted smoother like a strong cup of coffee which i think it should taste like. So anyways, i'm going to experiment more with this cup, but so far i like it even though it's not what i expected. Maybe my machine can't build the pressure in the cup, but otherwise my latte did taste good. This non pressurized cup looks like a high quality pressurized cup. It has finer holes on the inner surface, and slightly larger holes which populate most of the bottom surface. The machining looked quality and had a slight polished sheen to it. When i washed it with water, i did notice that i can force water through it from the faucet, so it is very low pressure at most and will eventually let the water fall through the basket. So it definitely is a non pressure type cup. So with that, i'll tell you my measurements for my handle that holds the cup. The inner diameter of cup was 51.3 mm, outer diameter is 52.8-53mm, that top edge lip diameter was about 58.4mm and about 24.9mm tall. So if your handle can take a cup roughly these dimensions, this will fit. Overall i'm glad i tried it. I dont think non pressurized is correct for my machine, but it does generate a different tasting cup and i do like it so i'll keep it.
DGL
Comentado en los Estados Unidos el 12 de septiembre de 2024
I had a hard time popping it into the portafilter that came with my delonghi ecp 3620. But it fit well once it's in.
Productos recomendados
Mex $599.00
Mex $ 293 .00 Mex $293.00
Mex $209.99
Mex $ 121 .00 Mex $121.00
Mex $359.49
Mex $ 190 .00 Mex $190.00