No hay artículos en el carro
No hay artículos en el carro
La cinta de aluminio Steelsoft / cinta de aluminio de 13 yardas es perfecta para conductos, unidades de CA, horno, calentador de agua caliente, aislamiento de automóviles, proyectos de reparación y reflexión de calor de claraboya, etc. Cinta adhesiva de alta calidad para HVAC
- Características:
1. La cinta adhesiva para conductos más gruesa de 3.6 mil no incluye papel de respaldo de 3.6 mil, antes de despegar el papel de respaldo y no se arruga ni se riza fácilmente.
2. Cinta de metal resistente, lámina más gruesa y calcomanía calcomanía calcomanía que soportan más resistencia.
3. Cinta adhesiva de aire para soportar una vida útil más larga. Adhesión de pelado: 4 libras/pulgada
- Especificaciones:
1. Conductividad: conductora de una sola cara.
2. Grosor del calcomanía de papel de aluminio: 3,6 mm
3. Grosor del papel de respaldo: 3,6 mil
4. Ancho de cinta: 2 pulgadas
5. Longitud total: 13 yardas
Linda
Comentado en los Estados Unidos el 17 de agosto de 2024
It came in a timely fashion, and the tape worked exactly like like I expected it to very nice tape for using an extremely hot areas
Tat'r
Comentado en los Estados Unidos el 21 de febrero de 2024
I've used other tapes at higher prices and they were a waste of money. This is worth the money and it actually stuck to anything, even if you don't clean the surface first.
Amy S.
Comentado en los Estados Unidos el 13 de mayo de 2023
I got this so I could secure my dryer vent to the wall, and to keep bugs from coming in. It worked great. You get a decent size roll, and it’s very easy to use. I love that I could tear off pieces and didn’t have to worry about scissors. The paper backing peeled off smoothly, and it is just thin enough to make it easy to manipulate. It has excellent adhesion, and it’s been in place for days and hasn’t let loose. This is the tape you want to use to secure dryer vents and hot air duct work- duct tape could possibly be a fire hazard and doesn’t withstand the heat as well as foil tape. And for the price you can’t beat this.
KPR
Comentado en los Estados Unidos el 3 de diciembre de 2023
part of a range hood repair, used as a second layer, on ducting seams. in small pieces it worked well, longer ones folded back and became useless. did the job, but was a little frustrating
BennieV
Comentado en los Estados Unidos el 30 de noviembre de 2020
I lined the inside of a 5-gallon bucket with this tape in order to give it a reflective layer to cure 3d printed resin parts and to protect the bucket itself from the UV lamp. This worked well. It's fairly sticky and I wanted to not have bends or folds in the tape, and the bucket is slightly tapered, so I ended up working in small, 20-30" lengths. I would say that shorter lengths are MUCH easier to manage. If this sticks onto itself, it can be impossible to unstick. However, this worked very well for my intended use and I can encourage others to do the same. I used a sharpie pen body to burnish (rub in) the tape into the bucket and make sure it stuck and softened the edges.
Productos recomendados
Mex $460.23
Mex $ 225 .00 Mex $225.00
Mex $156.99
Mex $ 80 .00 Mex $80.00
Mex $657.80
Mex $ 302 .00 Mex $302.00
Mex $36.80
Mex $ 19 .00 Mex $19.00
Mex $361.99
Mex $ 170 .00 Mex $170.00
Mex $243.11
Mex $ 121 .00 Mex $121.00