No hay artículos en el carro
No hay artículos en el carroDescripción del producto: Modo: Tuerca de 3 pines-22 mm Modelos de pines: 3 pines. Tamaño del cable de aplicación: 0,75 mm². Voltaje nominal: 220 V. Corriente nominal: 5 A. Grado de impermeabilidad: IP65. Grado ignífugo: UL94V-0. El tamaño más grande de la tuerca: 22 mm. Tamaño estándar: Macho (incluyendo cabeza impermeable) L = 200 mm. Hembra (incluyendo cabeza impermeable) L = 200 mm. Paquete: 5 pares de conectores impermeables de tuerca de 3 pines a 22 mm. Tenemos 2/3/4/5 pines, vendiendo en la tienda, si lo necesitas, comprueba Si necesitas una longitud especial u otro cable, ponte en contacto con nosotros para personalizar.
Sgt B
Comentado en los Estados Unidos el 14 de abril de 2024
Used for pixels lights for Christmas display. Makes setup and take down easy
Steven
Comentado en los Estados Unidos el 1 de junio de 2023
I bought this resistor kit to flesh out my electronic parts junk box resistor selection. It added a few standard values that I was missing in my selection and needed for a project. Spot checking a few of the resistors with my DVM showed they were all within the rated tolerance.Overall I am quite pleased with the purchase.
Rob R
Comentado en los Estados Unidos el 7 de marzo de 2023
What a surprise. I've read reviews about these resistor kits from China that claim+/-5% but measure worse. This kit (based on random samples) measured better than +/-1% for resistors 1K and higher. Granted, my Agilent DMM is not calibrated to NIST traceable standards, I think this resistor kit is pretty good!
Customer
Comentado en los Estados Unidos el 5 de marzo de 2023
More resistors than I'll ever use on the cheap. They are within specs which was a surprise considering the price.
Customer
Comentado en los Estados Unidos el 11 de septiembre de 2022
Tuned out I only needed two wire connectors, but these do the job just fine, and they are first rate quality
Kelvin Scott Sampson
Comentado en los Estados Unidos el 4 de marzo de 2021
The 1/4W size is not really compatible with the breadboard. Perhaps the next size would be better. I do like the packaging.
BC
Comentado en los Estados Unidos el 6 de mayo de 2020
love the waterproof connections. Add a little dielectric grease and these are pretty well waterproof. it's cheap.negative:The wire :( The wire is not super high quality. Only the tip of the exposed wire is tinned. This is slightly coarse not super flexible almost copper wire. With how stiff the actual wire strands are, I'm pretty certain it's not a true copper wire. Whether that's good for corrosion or bad for the resistance/amperage/AWG rating is unknown.Waterproof connections SHOULD have fully tinned, fine copper wiring with nice flexible insulation. I'd pay more for quality..
CarlS0525
Comentado en los Estados Unidos el 15 de enero de 2020
This connector is high quality material, made to fit together, gland seal will keep it moisture out, boxed to prevent shipping damage and will last for the life of my projects. If your looking for a 120 volt connector these fit the bill.
Melen's Dad
Comentado en los Estados Unidos el 24 de agosto de 2019
Installed these on a motorcycle to add some auxiliary tail and turn lights, they are totally exposed to rain and bad weather. Been in use for nearly 5000 miles so far and they remain weather proof and working. Hard to fault what works.
P. Meyer
Comentado en los Estados Unidos el 1 de marzo de 2017
Neatly packaged in individual bags with tags for the value. Only neg is that all of them are below the rated value, probably within the rated tolerance (I didn't check). None are above.I needed a 10/1 divider and could not make a perfect one because of that. I should have gotten 10 turn precision pots.Still a nice collection.
Productos recomendados
Mex $1,159.82
Mex $ 521 .00 Mex $521.00
Mex $99.99
Mex $ 59 .00 Mex $59.00
Mex $419.09
Mex $ 209 .00 Mex $209.00
Mex $364.99
Mex $ 189 .00 Mex $189.00