No hay artículos en el carro
No hay artículos en el carroThe Hunters
Comentado en los Estados Unidos el 31 de marzo de 2025
Came quick and I have enjoyed it every print since installing. Installation was easy and the company has some pretty good documentation and videos to help you through the process. The build quality seems solid and after the correct firmware flash it was up and running like it was always there. The multi-point mesh bed leveling is great and has solved a lot of my layer issues in my prints.I wish I bought this sooner. Do recommend and would buy over and over if I needed to.
Richard
Comentado en los Estados Unidos el 17 de marzo de 2025
Wanted to write this review because the description does not mention the Ender 3 v3 ke. This works well and is a great replacement for the Ender 3 v3 ke. You will need to use the old connector cable as the new one is way too long. You will also need to use the bracket from your current system.
brad watson
Comentado en los Estados Unidos el 15 de marzo de 2025
Added to my ender 3v2 and was easy to install and makes leveling so much easier and keeps it level longer. Nothing is perfect but it's close.
Juan Carlos González López
Comentado en México el 6 de enero de 2025
Funciona de maravilla, solo que le doy 4 estrellas porque tuve que rediseñar el soporte de instalación pues no se ajustaba de forma correcta a la altura del nozzle.
P. Cardelli
Comentado en los Estados Unidos el 17 de marzo de 2024
Update: Contacted Creality Support, submitted information about what happened with a video of the issue, they are sending a replacement. My other one is working fine. So I'm sure it was just the luck of the draw. It is a little different leveling, and I still recommend a manual level, and switching out the springs for spacers.I have two of these on two different printers, one failed functioning at probably 25 days, but I did not identify it until I replaced the motherboard about 5 days later thinking there was a problem with that. A little bummed. It is a process to refresh the firmware on your printer. I think I had a faulty original 4.2.2 motherboard too which may have lead to the failure. Either way, not a bad price, but as for reducing leveling workload I think there is not a time savings just a different way of leveling, and I still don't trust 100%, as I like to level manually once in a while and use spacers instead of springs for a more stiff and level bed that is less likely to shift.
Norma
Comentado en México el 12 de marzo de 2023
con esta mejora que le di a mi ender 3v2 ya no tengo tanto problema al momento de nivelar la cama, cabe aclarar esto no te quita el hecho de que nivelar la cama cada x tiempo pero si ayuda a que las piezas queden con mejor acabado y sobre todo esa primera capa que a muchos se nos dificultaba que saliera perfecta, la recomiendo
MKay
Comentado en los Estados Unidos el 10 de noviembre de 2022
I had previously upgraded my Creality Ender 3 Pro to the 4.2.7 control board so I already knew how to open up the control bottom plate. As a result of that experience and by watching several on-line videos about the CR Touch installation I found the physical installation of the CR Touch to be quite easy.Trouble begins soon after. I downloaded the correct firmware for the BLTouch (yes even though it's a CR Touch) and it loaded right up on the printer but I noticed Chinese characters on the bottom of the Info screen and fully Chinese on every other screen. This is a 2 year old printer so I have the original small display not the touch screen display. You have to press the button from the Info screen and scroll down to the next to last line and press to reveal the other language choices.After that, the screens don't agree with the small instruction booklet that came with the kit or it's bigger on-line version. So it takes some effort to find the various items that you'll need to access in order to calibrate the CR Touch.After alignment my initial impression of the performance is excellent. Remember to add the G29 command to your slicer and the printer will do a bed leveling prior to every print. It seems to work very well based on my 2 day experience.Sadly, the firmware regularly crashes. You know it crashed because you'll see some Chinese characters on the display. After a crash it forgets the language and it forgets the Z Offset that you entered. You will have to redo these two items.On-line research led me to the Marlin Firmware site where you can download their version of the firmware. You have to register on the site. They request a donation but I understand that you can enter zero. There are some minor differences between this firmware and the Creality firmware but I've been using it for another whole day and it has not crashed.When you use this new firmware or probably the Creality firmware as well, you must try the load filament feature. Sit down and enjoy.
Eduardo Marquez
Comentado en México el 30 de octubre de 2022
No se pudo cargar el contenido.
Lex Ramib
Comentado en México el 30 de septiembre de 2022
Las instrucciones que traen son pésimas, las hizo un niño chino que no sabía inglés ni cómo instalar el nivelador. No queda otra más que buscar videos en internet y coaching en foros. Ojo, cuando instalen el firmware asegúrense que el archivo sea “.bin” y no tengo ningún otro punto “.” En el nombre o si no nunca va a jalar y en la pág oficial baja con un punto en el nombre , gracias china.
Productos recomendados