No hay artículos en el carro
No hay artículos en el carroDesmond Marca DPC-140: Arca-Swiss compatible placa QR. Diseño doble entretejida. 140 mm (5,5 pulgadas) de largo. 2 x 0,64 cm -20 tornillos (tornillos tienen ambos Desatornillador de cabeza plana y 4 mm hexagonal, 4 mm allen la llave se incluido) completamente de metal (aluminio). Incluye 2 3 mm hex tornillos de seguridad en la parte inferior. 3/20,32 cm centro zócalo roscado. Ideal para Nikon y lentes EOS: 400 mm F2.8, 500 mm F4, 600 mm F4. Por favor Nota: No es compatible con abrazaderas de palanca derecha RRS realmente cosas.
L. Silveira
Comentado en los Estados Unidos el 25 de marzo de 2025
I couldn't find this information listed, but this plate without screws weighs 105 grams. They made less "lightening" cuts compared to plates from other manufacturers, so the plate is heavier and feels more solid, which is appreciated for certain applications. My only critique are the included 1/4-20 screws, which were also very heavy duty and were a very tight fit into the 1/4-20 holes in my camera cage and cheese plates. I ended up swapping them out for other 1/4-20 screws that were easier to install/remove.
CRC Idaho
Comentado en los Estados Unidos el 17 de diciembre de 2024
A good deal. Strong. I use it mounted 2 points on a Nikkor 600 f/4 and it stays stiff, no slip or creaks on a gimbal or monopod. You’d think it’s welded.
Delroy
Comentado en Canadá el 27 de octubre de 2023
I needed a long lens plate. I have the adapter for the cotton carrier vest added to it as well. That way, I can use it that way and use on monopod or tripod without having to remove the adapter. Saves me time and less chance of dropping/losing parts.
C.W
Comentado en Canadá el 30 de noviembre de 2022
Nicely made. Bought it to balance my Neewer Aeca-compatible gimbal, fits perfectly
Mikejbb
Comentado en los Estados Unidos el 12 de julio de 2013
I know its a lens plate, but it's about 5.5" long and has holes that will fit most cameras. The plate has rubber cushions on top to keep the camera(lens) from twisting, and they work. It's made of high quality black aluminum that feels it will hold up.I recently started doing 3D photography because I just got a 3D TV. And now I use this plate on my tripod to keep the camera perfectly aligned while changing the position of the camera between the 2 shots. I use an Arca Swiss tripod head and the plate will slide 1.75" to the right and left for 3.5" difference. And you mostly only need 2.5" difference so this plate works perfectly.I have a Markins M10 Arca Swiss tripod head and it has a small nipple that sticks up to stop the camera from sliding off the tripod if it's loose. I didn't have the tool, so I used a dremel tool to grind off the nipple so it doesn't stop the plate from sliding any more.The plate is made so you could attach Arca Swiss attachments to the top too, but I haven't use that feature.Happy 3D shooting.
Productos recomendados