No hay artículos en el carro
No hay artículos en el carro El micrómetro exterior REXBETI es una herramienta de medición profesional. Con una precisión de 0.000 pulgadas, puedes obtener la mayoría de las medidas de presión de la gran visualización LCD clara. Viene con una funda dura y resistente para almacenamiento y protección.
Características:
● Rango 0-1 pulgadas/0-25 mm.
● Precisión +/- 0.000 pulgadas.
Resolución 0.00005 pulgadas/0.001 mm.
● Conversión métrica/pulgadas.
● Modos absolutos.
Contenido del paquete:
1 micrómetro digital REXBETI.
1 funda de almacenamiento.
1 manual de usuario.
1 batería extra CR1632
BobsMyUncle
Comentado en los Estados Unidos el 7 de marzo de 2025
Well built. Measuring a 1-2-3 block with Mitutoyo calipers and this both reported 1.00000. I'm happy.
H. Buscher
Comentado en los Estados Unidos el 5 de marzo de 2025
Amazed that any country could make this thing for under $300! Fine finishing, great design, works exactly as advertised.Checked against another standard and it really is accurate to about .0005 inches. Holds its zero for repeated on/off cycles, even reads negative numbers if screwed down too hard. Embarrassing to buy it at this price. Nigglings: Mine does not have the data port shown in the instructions, and they do not explain what "ABS" function actually is for.
J. L. Wheeler
Comentado en los Estados Unidos el 15 de septiembre de 2024
I have used this to measure my 3D prints and refine the designs. The accuracy is good for what I need it for and has a calibration cert. The display is very nice and easy to read from a distance. The controls are a breeze and easy to operate due to really good build quality. Great buy for what I need.
CpCeballos
Comentado en México el 20 de agosto de 2023
Me gusta que es muy fácil su uso y te da la medida exacta del espesor de los productos
John T
Comentado en los Estados Unidos el 25 de enero de 2023
With a fresh battery installed, the unit zeroed easily, held its zero admirably after repeated measurements, and was easy to use. The unit produced fully repeatable measurements to the last digit on the display, which is generally a good and desirable thing for a micrometer to be capable of providing.I had purchased this item for its low price (relative to some other similar products) and because it had a bunch of positive reviews. One other convincing factor, however, was that the product listing said it would come with an extra battery. On receipt, the unit had a battery installed and it was dead. Appeared to be brand new, not a return, and there was no spare battery in the unit.So, I spent an extra $7 to get a new CR1632 3v battery from my grocery store. The battery size is somewhat unusual, so I feel I got lucky to find one locally. Amazon sells multi-packs of these batteries for just a few dollars. Unless you are doing a lot of measuring, I recommend removing the battery before storage & just keep it in the provided storage case. Something to be aware of: there is a small data port on the back of the unit - this is covered by a small removable square door - the little door is easy to displace, so just be aware. If the door gets lost, it shouldn't cause problems unless metal enters the data port receptacle (looks like a mini-USB connection). I have not tried to use a data cable with this unit.All things considered, I can recommend this unit to others, with the caveat that you may need to order a spare battery at time of order, or be ready to get one on receipt.
Jose Torres
Comentado en México el 3 de septiembre de 2023
La calidad no es para volverse loco pero si nos ha servido bien.
Arturo H.
Comentado en México el 2 de abril de 2023
Al segundo día falló hasta por 12 milésimas. No hubo forma de corregirlo.
Francisco Chacón
Comentado en México el 17 de abril de 2023
Buenas tardes.Compre este artículo pero tengo dudas de su medición.Cuando lo quiero poner en 0 sigue avanzando hasta ser negativo el número.Cómo puedo saber hasta cuando llega al 0 real? Estoy aplicando mucho torque en la perilla o no debe suceder eso?
Walt
Comentado en los Estados Unidos el 13 de mayo de 2022
Testing with gauge blocks, it's right on the money. I read a bunch of reviews with people complaining that it won't return to zero... When I got mine, the Absolute mode did have the problem where it was WAY off zero, but like the Incremental mode, there is a way to reset that. It's just a different process that I figured out in about 30 seconds without even looking at the manual (press and hold the middle button.) Part of the responsibility you have when writing a review is to educate yourself on the product you are reviewing so you don't inadvertently mislead people.This is perfect for a home-owner / hobbyist on a budget. If you are a business doing high precision machining, yeah, go for the Starrett or Mitutoyo instead. My old mic is a manual Mitutoyo, but I wanted something I could leave out on the bench ready to go for quick checks and the ability to read in both standard and metric is super handy at a fraction of the price of high-end brands.
Productos recomendados
Mex $2,402.15
Mex $ 1,056 .00 Mex $1,056.00
Mex $2,193.39
Mex $ 1,074 .00 Mex $1,074.00
Mex $3,737.86
Mex $ 1,644 .00 Mex $1,644.00
Mex $2,860.31
Mex $ 1,287 .00 Mex $1,287.00