Ashley M Toro
Comentado en los Estados Unidos el 12 de julio de 2024
This is exactly what I needed for my Nespresso
Tara Byers
Comentado en los Estados Unidos el 8 de mayo de 2024
This tray is very thin and sleek allowing you to finally get a cup under the Nespresso unit. It is 3D printed
luis_lezcano
Comentado en México el 24 de marzo de 2024
Muy bueno y en tiempo
Customer
Comentado en los Estados Unidos el 8 de diciembre de 2024
There will more clean up and leaking under the tray than the standard one your original product came with but it does allow a wider range of mugs to be used with my mini breville nespresso
Loreley
Comentado en los Estados Unidos el 11 de noviembre de 2024
Queda super
DOM
Comentado en México el 3 de septiembre de 2024
Compatible con la cafetera, capacidad para razas más altas, fácil de lavar, resistente
Roxane z.
Comentado en los Estados Unidos el 25 de septiembre de 2024
Had my model # coffee machine as a fit but did not fit
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
MarkA
Comentado en los Estados Unidos el 25 de abril de 2024
Quick and easy mounting of Arduino Mega with supplied hardware, snapped right onto DIN rail. It is a quick and easy mount that still allows you to get to all the I/O pins.
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
AP
Comentado en Francia el 2 de diciembre de 2023
Acheter pour mettre à jour une installation jeedom et placer le projet dans un coffre elec :Le Pi est associé à un disque M2 et une carte HAT POELe montage est aisé et les pre perçages sont parfait pour personnaliser le montage !
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
G. Anderson
Comentado en los Estados Unidos el 10 de julio de 2022
This is a great rpi 4 mount but also with holes for all kinds of small board computers and rpi models. Made it easy to mount my rpi to wood but also came with don rail hardware.
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
David Albert
Comentado en los Estados Unidos el 20 de diciembre de 2022
I used it with a Raspberry Pi in the edge-mounted configuration and it worked very nicely. The Pi fits well and the plastic DIN-rail mount held it securely, but it was still easy to release. The only potential caution is that the DIN-rail mount is behind the Pi, so releasing it requires access to the back of the unit (you can't release it from the front via a screwdriver pry notch as you can with some other DIN-rail mounts). If you have access to the back of the unit, it releases easily with finger-pressure (no screwdriver prying required).
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.
R. Ferguson
Comentado en los Estados Unidos el 9 de abril de 2022
I've been using these brackets for over a year and I'm very happy with them. They allow me to gang a number of Raspberry Pis on a DIN rail. They offer a number of mounting options to the DIN rail. The open design gives great cooling (I have a Pimoroni fan on a RPi 4 and it never has to run). And I have good access to the pins when I want to hook something new up to the computer.