No hay artículos en el carro
No hay artículos en el carroMás información del producto
Jose
Comentado en México el 12 de febrero de 2025
Me encantó, supera mis espectativas
Zzzzyx
Comentado en Canadá el 10 de enero de 2025
I bought this blade as a spare for my Riyobi circular saw. I haven’t used it yet, but other Diablo saw ladies were good so I expect the same of this one.
james perry
Comentado en los Estados Unidos el 5 de mayo de 2024
Needed a finish blade for my M12 circular saw,, although I would not use this saw for much of my woodworking projects,,it comes in super handy for making small lap joints and cutouts. When doing those cuts you need a fine tooth blade and this blade is perfect one!! Super thin kerf and really smooth finish!! If you have a 5 3/8 circ. saw you need this blade!!!!
Chupa_Chup_Pupz
Comentado en Canadá el 18 de noviembre de 2024
I used to buy the Avanti brand at HD as I never thought about buying blades on Amazon. Oh wow, what a difference, you may be paying more for this blade, but the $15 blade from HD sucks, my last blade lasted 3 cuts and now it's all dull... Total waste of $. I needed to cut Melanie boards so yes they will dull your blade faster but come on, 3x ... Maybe 20 mins max worth of usage? Blah, buy this blade and forget the crap they have at HD, fun fact this size is NOT for sale at HD...just pure dumb luck I found it here... Grab it and you won't be disappointed.
Dementium
Comentado en México el 23 de octubre de 2024
Corta muy bien.
pedro p.
Comentado en México el 24 de enero de 2024
Excelente en calidad … muy buen material
Chuy
Comentado en México el 8 de agosto de 2023
Para melamina muy útil
Sologadgets
Comentado en México el 20 de agosto de 2023
Excelente calidad de construcción, cortes precisos, recomendable
Ricardo F.
Comentado en México el 27 de febrero de 2023
Brutal su desempeño, lo utilice para melamina, y sin ajustar el grosor (nada mas la puse y asi corte), corto de maravilla y sin despostillar nada de nada.
FERNANDO IBARRA
Comentado en México el 27 de diciembre de 2023
Un producto de gran calidad
JE usuario
Comentado en México el 2 de octubre de 2023
Corte semi fino, excelente velocidad
William
Comentado en Canadá el 25 de mayo de 2022
My review is in the headline. Nothing more to add. It's a good blade.
Archie Md
Comentado en los Estados Unidos el 8 de noviembre de 2018
(Edit: meant to add this BC-before covidMost important noted feature of this 6 1/2" blade for 20V saws is that the smoothness of the cut with least amount of friction aids in stabilizing the motor/base plate interface. I've found that ALL the cordless saws have flimsy tilt and cut depth components...the least bit of blade binding causes the blade torque to rack the metal frames...resulting in non-perpendicular cuts, run out from line of cut, strain on the motor & motor bearings, and reduced battery life as well. Long a fan of the Freud blades in Makita & Bosch work saws can't understand why I didn't buy the 6 1/2" blade earlier. Makes the cheapest saws run like butter, smoother cuts, quieter, less chipping, and above all less aggravation and time savings ...end edit)Last year I bought the Olshun 5 1/2" 36 tooth trim blade for my B&D 20Volt Max.saw. It worked fine for the fence slats and 2x framing but noisy.After reading the reviews of the Freud D0536X Diablo 5 3/8" 36 tooth blade I ordered one.The Diablo 10mm center mounted perfectly on the B&D arbor, though with the usual struggle.Test cuts on a 2x4 seasoned outside under cover were a surprise. With the blade at full extension only a few teeth showed past the depth of the 2x4, yet the blade cut smoothly, quietly, with no drag whatsoever. The Olshun blade though slightly larger had a bit of drag that was noticeable and was noisey.The Diablo cut is on the left...the surface is startling in it's smoothness, with only tiny whiskers along the surface of the cut. A quick stroke with a sanding block took care of those.On the right is the Olshun cut from the same piece of wood which was made last fall. It was one of the first cuts from the new Olshun blade. Same B&D battery at full charge was used for both free hand cuts.To me the Freud Diablo wins by a mile. Well worth the extra cost. When finished ends need to be exposed this is the go to blade for me. Time saved instead of hand finishing ends really adds up when 40 or 50 fence slats need to be cut.The light weight of the saw and the Diablo blade will make finish carpentry work of birch plywood much easier.
Productos recomendados
Mex $364.59
Mex $ 171 .00 Mex $171.00
Mex $792.40
Mex $ 419 .00 Mex $419.00