No hay artículos en el carro
No hay artículos en el carro Esta es una forma muy económica de extender el límite de tiempo de tu mando a distancia original.
Simplemente reemplaza la funda exterior rota, no hay necesidad de gastar costoso para reemplazar todo el fob.
Especificaciones:
para FCC ID: M3N-A2C31243300.
IC: 7812A-A2C31243300.
para P/N: 164-R8117
Botones: bloqueo, desbloqueo, arranque remoto, tronco, pánico.
Color: principalmente negro y plateado.
Compatible con las siguientes vechículas:
Para Ford F150 2015 2016 2017.
Para Ford F250 2015 2016 2017.
El paquete incluye:
1 carcasa para llavero.
Nota:
1. Asegúrate de que tu llave original tiene la misma combinación de botones y FCC ID/PN con nuestro soporte para llaveros.
Si encuentras un problema tan difícil de cerrar la sección de la batería, prueba las baterías CR2025 más delgadas.
Chong Chong
Comentado en los Estados Unidos el 6 de marzo de 2025
I did what another reviewer said to do and used the old silicone from the original key and was able to close this shell up. It didn’t want to close with the included silicone. Buttons are a little stiff but I imagine they will get easier to push over time. Great value here - I hope it lasts.
DStone
Comentado en los Estados Unidos el 10 de marzo de 2025
I received the 5 button version for a 2017 f-150. It is essentially the same as the OEM case with lower quality injection molding, and possibly (?) a non-metallic ring holder. I was able to move the old microchip over to the new housing with a bit of work.Docking one star for how difficult it was to install the guts into the housing. It took a lot of fiddling to get everything to sit in the housing such that it would close completely. When everything is aligned the buttons work fine, however it took a lot of patience and force to get the clamshell to close. Before my final attempt I was prepared to return this product. Expect to need to pry this thing apart when its time to change batteries, which in turn will probably crack the housing at the key ring sooner than stock. I think this comes down to looser tolerances on the injection molding--so your sample might be better or worse in this regard.
Richard N. Morales
Comentado en los Estados Unidos el 13 de abril de 2025
One of my fob's for my 2017 F150 Lariat had taken one too many falls on the ground. I had to start using glue to keep it somewhat working. Being retired and living on a tight budget I didn't have an extra few hundred dollars to purchase one from the dealer, then pay them to program it. So I thought "what if I could just purchase the shell of the fob and transfer the circuitry. Well to my surprise I found it on Amazon. I had to be patient aligning everything for it to close correctly but it works great! The only thing missing is the Ford Logo on the back, but you'll never notice a difference with the fob. I recommend using lithium batteries as well.
Cumplió en tiempo y forma, excelente te producto
Comentado en México el 24 de enero de 2024
Buena calidad
Thomas
Comentado en Canadá el 3 de septiembre de 2024
I had a little trouble programming at first. My Canadian vin seemed to cause issues. I just let the app read the vehicle information and everything worked flawlessly
Luis Renteria
Comentado en México el 11 de septiembre de 2024
Excelente compra los recomiendo ampliamente.
Bill
Comentado en Canadá el 6 de noviembre de 2023
Fast shipping, product seems well made, easy to change inards, went back together well and works fine... I have purchased similar before this is the best one yet from and strength and fit point of view, let's hope it survives the occasional drop on hard surface.
Productos recomendados
Mex $358.24
Mex $ 161 .00 Mex $161.00
Mex $191.53
Mex $ 97 .00 Mex $97.00
Mex $352.79
Mex $ 162 .00 Mex $162.00
Mex $676.06
Mex $ 344 .00 Mex $344.00
Mex $459.99
Mex $ 229 .00 Mex $229.00