No hay artículos en el carro
No hay artículos en el carro Se trata de un alambre de traste de acero inoxidable absolutamente hermoso y duradero, en longitudes prácticas de 8 pulgadas. Este alambre de traste es una de las compañías alemanas más conocidas de alambre de traste y es de color plateado brillante. Como ventaja adicional, es uno de los cables de traste más duros y duraderos disponibles en el mercado, mucho más duraderos que el cable de traste estándar de níquel y plata, por lo que tu trabajo de traste no solo se verá genial, sino que también durará mucho, mucho más tiempo. Este alambre de traste se considera de ancho medio de corona y altura de corona media, pero en general está cerca del alambre de traste estándar "medio/medio" de Stewart-MacDonald.
Este cable de traste se puede utilizar para reparar/reemplazar trastes en una guitarra eléctrica o acústica existente, banjo u otro instrumento de cuerda de tamaño estándar a más pequeño, y también es ideal para la construcción de instrumentos nuevos. Las dimensiones son las siguientes: Especificaciones de tamaño: Altura de la corona: 1,09 mm, ancho de la corona: 2,03 mm, ancho de la espiga 0,510 mm. Se recomienda un ancho de ranura de 0.23 pulgadas para obtener los mejores resultados al instalar este cable de traste. El alambre de traste de acero inoxidable es más difícil de trabajar, y se recomienda para personas con experiencia en trabajo de trastes estándar.
Jennifer Lynn Cody
Comentado en los Estados Unidos el 13 de febrero de 2024
I got about 3/4 of the way done with the refret on a customers acoustic guitar and found that the wire in the bag was a mix between nickel and stainless. It’s jescar wire allright… but it not all stainless….its easy to tell stainless from nickel with bigger wire just from the way it cuts.. but with acoustic wire, it’s more subtle and sadly, I didn’t notice until I was almost done…. And the customer needs the guitar back this weekend….. i’ve been working with stainless wire for over ten years…. I know the difference…. But until i got a piece that “snapped” instead of “chunked” when i cut it… i didn’t think to check because it said “stainless” on the label….. What a nightmare.
Customer
Comentado en los Estados Unidos el 21 de noviembre de 2024
Great product! I did not carefully research the size and ordered the wrong size, NOT the sellers fault. So I ordered the same thing in the right size. they are ever so slightly tighter than a 9.5 radius, which makes them perfect for a 9.5 radius guitar fretboard.
MrRazorsReviews
Comentado en los Estados Unidos el 24 de mayo de 2017
I got the wrong ones when I ordered this, but the seller sent me the correct ones and they feel great. As long as you have the right tools to cut the Stainless steel you will have no issues with these. The Jescar fret wire is good and hard and will last for a very long time.
Trashbag
Comentado en los Estados Unidos el 9 de enero de 2017
The quality of these parts looks great. No idea how they perform yet but it seems clear they will be perfect for the intended task.
papo
Comentado en los Estados Unidos el 23 de marzo de 2014
I like these stainless steal fret wire for the reason that they look awesome. They are way harder than the nickel & silver one. String bending is definitely easier. They do not wear out the easy. I'm not an expert on fretting guitar. But I certainly was not afraid of learning. The stainless steal is a little hard to work with because the tang is too small for the medium, medium/medium and medium highest is 1.47 mm and the others are 1.27 and if you don't have a perfect fret channel it will pop out at one end or the other. In order to work with this problem what i have done was I bought the fingerboard radius block a C- clamp and a piece of 1/4 wood to protect the bottom of the fingerboard. 1 Prepare the fret wire hammer it in and put 20- Medium Super Glue on both side of the fret once it has been hammer in. Wipe the excess. Clamp the fret wire with C-Clamp and let it dry. After glue dries, file away the excess glue and do the same thing with all of them if have any problems. Don't be afraid. I messed up two guitars before I started to gain experience. I love to do this job. Happy fretting.
Productos recomendados
Mex $180.99
Mex $ 95 .00 Mex $95.00
Mex $514.14
Mex $ 267 .00 Mex $267.00
Mex $129.00
Mex $ 69 .00 Mex $69.00
Mex $384.70
Mex $ 200 .00 Mex $200.00
Mex $249.00
Mex $ 146 .00 Mex $146.00