No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Otros parámetros
Legibilidad: ±0,1 mg Repetibilidad: ±0,1 mg Linealidad: ±0,2 mgTemperatura de trabajo: +15 ℃ - +35 ℃ Tiempo de respuesta AAM: ≤ 3 PFuente de alimentación: CA 110-240 VDimensiones: 20 x 29 x 31 cm (largo x ancho x alto). Peso: 3,6 kg
Comparación con otro saldo
N Henderson
Comentado en los Estados Unidos el 9 de agosto de 2024
Readings are very stable when left unloaded (it stayed at a reading of 0.0000 g all week.) If a load is left on it (like the calibration weight), it tends to drift by about 4 mg over a few hours, then stabilize.My impression of its construction is good, with a well designed and built enclosure, base, and pan. The glass cover plates slide easily. A $500+ scale might not sound 'cheap' to most people, but for an analytical scale, you're getting a lot for the money!
Safiri Regalado
Comentado en los Estados Unidos el 20 de noviembre de 2024
Resultó ser mejor de lo que esperaba
Customer
Comentado en Canadá el 29 de agosto de 2021
- it is very accurate for analytical and compounding use and the reading is very stable even when used inside a a running Hood. I took out one star because of the included calibration weight which has issues as follow :- the included calibration weight is not certified and looked kind of shady. when I calibrated against a certified weight 200gm, it did show a difference, so use your own calibration weight. the company should not have used a cheap one for a 0.1mg balance.the 2nd issue is that calibration is fixed to 200gm. you can not change it. on a 0.1mg high accuracy balance you should use a smaller weight. I purchased a 1gm certified weight just to discover that I can not use it to calibrate. but as a good surprise, it measured it very accurately (0.9999gm to 1.0000 gm with repeated attempts) after a calibrated the balance using my certified 200gm Wieght. so the balance is still very good value for the money, just purchase your own calibration weight.Also reviews you need to know how to correctly calibrate. you need to leave it in place to acclimatize for 2-3 hours , balance the base, leave it on for 1 hr. then attempt to balance. you should not touch the certified weight at any time (even to remove it from its case). do not touch the balance or you should wear nitrile gloves during the calibration. you should have all reading with the windshield closed and wait between steps for the balance to stabilize. once done verify and repeat then verify.
Productos recomendados
Mex $3,344.57
Mex $ 1,672 .00 Mex $1,672.00
Mex $3,121.95
Mex $ 1,248 .00 Mex $1,248.00
Mex $167.00
Mex $ 86 .00 Mex $86.00