No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Soporte para pistola de calor
El soporte de pistola de calor tiene una base magnética fuerte, que se puede fijar en cualquier objeto de metal, y la parte de la abrazadera se puede ajustar en ancho de acuerdo con los requisitos de trabajo.
Goma antideslizante
Ayuda a proteger tu equipo y reducir los arañazos.
Brazos flexibles
La parte del soporte se puede girar 360 grados, y la parte de la abrazadera se puede ajustar en ancho de acuerdo con los requisitos de trabajo.
Talla
La mandíbula se abre a mas de aproximadamente 2.3 pulgadas, minumum 1.5 cm.
3 lámparas de aumento
La lupa está fabricada con una lente de vidrio óptico 3X sin distorsión de dioptrías y rodeada con 42 luces LED blancas + 21 luces LED amarillas) de bajo consumo (alimentadas por USB) para una experiencia de visualización clara y ampliada. Con 3 luces de color (amarillas, cálidas, blancas) y contiene 42 bombillas LED, puede satisfacer varios entornos de trabajo. Los niveles de brillo, se pueden ajustar con una tecla (10 niveles de brillo en total). Aumento 3X mejora la calidad de la imagen y sin distorsiones. Ideal para leer libros, costura, manualidades y pasatiempos como la construcción de modelos.
Más detalles
Abrazaderas de cocodrilo
Las abrazaderas de cocodrilo se pueden girar 360°, cada clip de cocodrilo con una cubierta de silicona, para evitar que tus productos se rayen o aprieten.
Base magnética
Tiene una base magnética fuerte, que se puede fijar en cualquier objeto de metal. Es un buen ayudante para bricolaje.
Base más grande
Base de acero con recubrimiento en polvo de 11.4 x 7.1 pulgadas, más de 1.5 kg y extremadamente resistente para garantizar que tu estación de trabajo no se vuelca ni se mueva ni una pulgada.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
Wayne Cannon
Comentado en los Estados Unidos el 9 de abril de 2025
Wow! This is a great piece of kit.• Solid base, will not tip.• Goosenecks that stay in place, i.e., bends don't unbend• Accessory based have VERY strong magnetic connections• Nice quality halo lamp around magnifier• Two long and two short gooseneck alligator clips• Solid clamp for hot air wand, or other large diameter accessory on an articulated arm with tight joint-clamps.
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
BuriedInTech
Comentado en los Estados Unidos el 10 de agosto de 2024
Bought this to accompany a new soldering station and couldn't be happier with the product. Comes with a heavy-ish bottom plate and some rubber feet to help keep the base steady, even when the arms are bent out at an angle.It comes with a great ring light and magnifying glass that has a long flexible arm and a magnetic base that allows you to easily position the light over your work.There are a couple of long arms and a couple of short arms that have insulated alligator clips on the end, great for clamping wires or small circuit boards. The flexible arms allow you to position the workpiece in pretty much any direction.Theres also an adjustable rigid arm with a clamp for bigger pieces but I really haven't used that accessory much.Overall, it's a great addition to my solder station. Highly recommended!
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Happy Pet owner
Comentado en los Estados Unidos el 21 de junio de 2024
This is a GREAT tool. I find it very sturdy and usefull for detail assbly projects.The magnetic clips, light and clamps are very sturdy. I like that it has provide me with the insentive to create my own magneic tools that secure to the base. I see great expansion of uses with this tool.My only wish would be that the magnifing glass were a couple inches larger in size, I'm in my sixties and the eyesite is not what it used to be.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Gman
Comentado en los Estados Unidos el 4 de diciembre de 2024
Provides numerous holding points for your project. Everything well thought out.Base is heavy and has feet on it so the unit doesn’t move around.
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Alex S.
Comentado en los Estados Unidos el 27 de octubre de 2023
I have tried a few of the cheaper helping hands setups before and always been disappointed, but I'm really impressed with this one. The base plate has a decent amount of weight so it doesn't slide around on you. The magnetic bases are strong and solid. The flexible arms are properly stiff and stay where you put them, but still flexible enough to reach however they need to. The small "hand" clamps are really just alligator clips, but with two or three of them clipped to a work piece, it holds nicely in place and resists moving under pressure (doesn't move when using a soldering iron, etc). The posts work well for holding items both with their tips and sides so they're pretty flexible. The magnifier isn't large, but has a reasonable magnification, and the light source could be a little brighter, but is generally adequate for supplementary light if you've got other ambient lighting in your workspace anyway.The large clamp is actually very useful. It can hold a hot air gun, as suggested, but I found it was also great for holding probes in place, or even more cumbersome work pieces. I also discovered it works perfectly to hold my 7-inch-screen digital microscope, actually making this thing better than the stand it came with, and making it so much easier to see everything when working on small fiddly bits!Note: The single knob on the clamp arm does fully tighten _all_ the joints. However, you may need to really crank it to get everything properly tight. When I did this properly I found it could actually hold a fair amount of weight without moving, too.The only negative I've found so far is that the light uses a USB power cable, but does not come with a USB power supply to plug it into, so you will need to supply your own (but nowadays who doesn't have a few of those floating around?)
Productos recomendados
Mex $308.99
Mex $ 145 .00 Mex $145.00
Mex $215.00
Mex $ 107 .00 Mex $107.00
Mex $494.31
Mex $ 247 .00 Mex $247.00
Mex $4,285.70
Mex $ 1,881 .00 Mex $1,881.00
1 rollo de accionamiento K Groove .030 .035 compatible con Lincoln Pro MIG 140 ProMIG 12101 Soldador
Mex $461.15
Mex $ 207 .00 Mex $207.00