No hay artículos en el carro
No hay artículos en el carroSimplifique el mantenimiento de la impresión 3D con NoClogger, diseñado para desatascar eficazmente tubos, extrusoras y boquillas. Di adiós a la molestia de tirar en frío, desmontaje tedioso y reemplazos frecuentes de boquillas. Con NoClogger, mantener su impresora 3D en las mejores condiciones es rápido, fácil y sin estrés.
Alex
Comentado en los Estados Unidos el 20 de enero de 2025
When I don't feel like ripping my printer apart, this tool is a god send on a jam. Jam it in there (consensually of course) and watch that extruder poop out the jam.
Midas 3D Melts
Comentado en los Estados Unidos el 28 de marzo de 2024
I was very hesitant and didn't expect this to work, but I was pleasantly surprised. I removed the tube, heated the hotend, slowly jammed this thing in and watched the filament ease out. I had a piece of filament stuck in my extruder, so this didn't fix that issue but the tool did what it was supposed to do. I normally use a torch and hex that eventually gets stuck and gives me a hard time.
nikkolaus
Comentado en los Estados Unidos el 11 de abril de 2024
Well, what all the other reviews say is true... The handle seems 3D printed. It's not a bad thing, just not what you generally expect from a quality tool - but, hopefully you won't be using this to pop locks or jimmy cars open... so.. all is well. The part where I take issue with this tool is that you have to take the tool head off to use it, instead of going up from the nozzle end and unclogging it there, as I did with the tool that came with my Bambu Labs P1S (That thin tool snapped within a few uses). After taking the tool head off, the tool is so long and unwieldy that it feels more like a burden-some ice pick rather than an unjamming tool. The tool is as long and tall as the print bed depth of the whole unit is. I'm sure it works fine in an open-air unit, but my enclosed P1S with an extruder stacked on top of the nozzle requires disassembly before I can even think about using the tool... and then I'm basically trying to keep the nozzle plugged in and hot to push out the jam while also trying to feed in a 2 foot long tool.In addition, and possibly the biggest grievance is that the metal shaft or rod of the tool has clearly been run thru some kind of roller system in an attempt to get it straight, but only accomplished making a wavy metal rod that resembles a straight piece of metal. Now, granted, this thing is no banana, but you can feel the wavy bends between your fingers and see it when you look at the tool. Made for a 1.75 mm nozzle, it comes in at 1.59 mm thick. Now, that's not a bad thing. You want some gap between the inner wall of the nozzle and the tool. It also comes with a free razor blade to clean the tip.In the instructions you get a paragraph telling you to .. 3D print a cap for the .. tool you just purchased, with a 3D printed handle...? Why isn't this included? If I'm already paying you for a 3D printed handle and a bendy poorly straightened metal rod, is it so much trouble to include a 3D printed safety cap...?!The tip geometry seems good - hopefully it will last a few jams and serve me well.
Customer
Comentado en los Estados Unidos el 27 de abril de 2024
I think it needs to be about a inch longer so i wouldnt have to remove my filament tube each time but it works alright most of the time
Matthew R
Comentado en los Estados Unidos el 27 de septiembre de 2023
A friend of mine recommended this tool. I thought I would give it a try. The handle is 3D printed. The metal shaft has a sharp tip. (you can print an optional protector) It came with razor blades to clean it if you need to.I was using small hex or allen wrenches to push through clogs but this works better. It would only work with a straight filament path or almost straight.I find this a bit easier than the allen. Neat idea. Glad I bought it.
Productos recomendados
Mex $588.42
Mex $ 282 .00 Mex $282.00
Mex $197.99
Mex $ 100 .00 Mex $100.00