No hay artículos en el carro
No hay artículos en el carro
Brocas profesionales de perforación con núcleo de diamante soldado al vacío, cuando quieras perforar en paredes, piso o algo sin grietas, nuestras brocas de diamante de porcelana satisfarán tus necesidades en cada detalle, son precisas y flexibles.
El paquete incluye: 1 pieza de diámetro de 35 mm, 1 caja de almacenamiento.
Máquina aplicable: vástago triangular bloqueado firmemente, adecuado para cualquier taladro eléctrico, taladro de mano, taladro de banco, evitando que las puntas se deslicen, mejorando su eficiencia de trabajo. Cuando se utiliza amoladora angular, instala el portabrocas de amoladora angular.
Aplicación: recomendado: mampostería, piedra, cerámica cerámica, cerámica, cerámica, vidrio común, cerámica, mármol, granito, microlito, piedra de cuarzo.
Las herramientas matan: después de usar, mantén las puntas limpias y mantenlas en nuestra caja de almacenamiento, para una larga vida útil.
Kyle Beaton
Comentado en Australia el 5 de enero de 2025
Good quality worked well in fibro pits at work, saves the hassle of setting up a corer.
Zachary L. Miller
Comentado en los Estados Unidos el 9 de julio de 2024
I was skeptical to purchase a bit away from the “top tier” brands but wow, this works! It cored through my brick walls with ease. A good product for a great price - I’m in!
SSid
Comentado en los Estados Unidos el 19 de enero de 2024
Our countertop which is a Quartz Silestone (Cosentino Hybriq Q50) had a faucet but not a Soap Dispenser. We used this drill bit and you can see the project was completed successfully. It even cut through a piece of the steel sink as the holes were not aligned.I highly recommend it for countertop holes.
Bryan Cain
Comentado en los Estados Unidos el 31 de agosto de 2023
The pic shows the bit after multiple uses cutting holes out of ceramic tile. I used my battery powered drill to drill the holes and kept a tupperware container with water next to the tiles to continually cool and rinse the bit and you can see how well it held up to cutting 5-6 ceramic tiles in a row. I literally dunked it every 30 seconds or so, while spinning, and it really cleaned up the diamond grit to speed up cutting. Just note: keep the water level somewhat low in the bowl :)Definitely Recommended: Spend a little extra and don't worry the diamond coating will fade before the job is done!The packaging was great! The bit was very well protected inside a solid plastic case.
JD
Comentado en los Estados Unidos el 4 de junio de 2023
I had 2ea - 3 inch concrete slabs (24"x24") used as outdoor/pool small table tops that need to double as umbrella stands. Problem was getting a 2" umbrella hold all the way through the exact center. After marking diagonally and penciling the desired circle, I filled a large flat top OJ bottle with water and drilled a 1/4" hole near the top. Flipping the bottle over produced a nice water stream on the diamond bit as it cut through the cement slab like butter. Keeping the bit cool & lubricated made the drilling go super quick. Only problem was the slabs are 3" thick and the bit is a little more than half that depth.So once the bit bottomed out, I chiseled out the upper drilled out section down and drilled again, completely removing the desired circle core.The bit did this twice, being water cooled by the water in the OJ bottle, never slowed down or got dull. I'm guessing it's good for at least 2 more holes if I needed them.Highly recommended - much cheaper than the ones from big box stores that cost 3-4x what this did and 1 bit will go a long way if you use a normal drill at high speed, cool and lubricate with water and don't use hammer drill function - simple circular high speed drilling is optimum.
Productos recomendados
Mex $411.77
Mex $ 189 .00 Mex $189.00
Mex $395.46
Mex $ 193 .00 Mex $193.00
Mex $373.00
Mex $ 193 .00 Mex $193.00