No hay artículos en el carro
No hay artículos en el carro Hotend de cerámica actualizado para impresora 3D FLASHFORGE Adventurer 5M/Adventurer 5M Pro, kit de cabezal de impresión extrusora con termistor de cartucho calentador y boquilla de acero endurecido de 0,4 mm, impresión 3D de alta velocidad
Especificaciones:
El kit de repuesto de cerámica para hotend
Voltaje del calentador: 24 V 48 W.
Apto para FLASHFORGE Adventurer 5M/Adventurer 5M Pro
Temperatura de trabajo del termistor: 10 ~ 300 ℃.
El paquete incluye:
1 kit de hotend mejorado AD5M.
Compatible con impresoras 3D: Flashforge Adventurer 5M
La instalación Hotend
Paso 1: levanta el hotend, aprieta la boquilla en la parte inferior y la garganta en la parte superior, y asegura el tornillo pequeño en el bloque de calefacción.
Paso 2: gira la tuerca de aumento en la parte superior de la garganta y fija el bloque de aluminio en la garganta, para que el extremo de la garganta esté nivelado con el plano del bloque de aluminio.
Paso 3: fija el hotend al bloque de alimentación, conéctalo a la placa de cableado a través del cable del motor y conecta el sensor, el tubo de calefacción, el ventilador y el cable PT por separado.
Paso 4: Coloque los módulos conectados juntos en la chapa metálica de la cubierta del cabezal de impresión.
Customer
Comentado en los Estados Unidos el 29 de marzo de 2025
pros: Bimetallic, all-metal hotend. Simple design. Hardened steel nozzle.cons: Not dimensionally correct. Nozzle is not replaceable. Thermistor poorly located.(Adventurer 5M) The mounting bracket on this nozzle assembly that is supposed to clip into the existing extruder housing is poorly toleranced and does not fit properly. I thought it had clipped all the way, but it was just friction fit since it was too big to be received into the mounting mechanism. PID tuning the hotend and autobed leveling calibrated correctly. On the first layer, it came slightly unseated (again it wasn't clipped in although it felt like it) and it worked itself loose enough to start gouging the build plate.i was able to get it to clip in properly after sanding it down; however, the slots that the clips are received into are too big compared to the stock nozzle, so it still has some room to wiggle.The hardened steel nozzle is not replaceable as it seems to be glued into the heat-block with a thermal adhesive.Every time the silicone sock is removed, it takes the metal clip holding the thermistor and ceramic heating element with it which is really annoying.The thermistor is designed to be placed in the heat block almost in contact with the ceramic heating element. So the printer is detecting the temperature of the heating element not necessarily the heat block. Not functionally a real problem, but a weird design choice.
BeeGee
Comentado en los Estados Unidos el 12 de marzo de 2025
Immediate failure. Running the PID calibration after installation revealed an NTC error. Upon inspection of the product, the thermal paste holding the heating element to the throat was not at all effective and the thermistor ending is not secure even when the clip is in place. I missed the return window by one day because I bought this as a backup and didn't need it right away. If you do buy one, check it right away.
Ivan W Shreve
Comentado en los Estados Unidos el 14 de abril de 2025
Works as described.
Way2Review
Comentado en los Estados Unidos el 24 de junio de 2024
Not using with a Elegoo personally, just check your connections and sizes to see if this will fit. Can always change the connectors if need be
Gregory S.
Comentado en los Estados Unidos el 11 de septiembre de 2024
The 3D Printer Heater Cartridge and NTC 100K Thermistor 24V 40W Kit designed for the Prusa i3 MK4 offers a seamless and effective upgrade for maintaining optimal hotend performance. With its compatibility, reliable heating capabilities, and inclusion of thermal paste, this kit ensures efficient heat transfer and accurate temperature readings, contributing to consistent and high-quality 3D prints.Pros:Precise Compatibility: This kit is tailored specifically for the Prusa i3 MK4, ensuring a perfect fit and hassle-free installation without any modifications.Efficient Heating: The 24V 40W heater cartridge delivers rapid and consistent heat-up times, enabling quick and efficient printing sessions.Accurate Temperature Sensing: The NTC 100K thermistor provides accurate temperature readings, ensuring precise control over the hotend's thermal performance.Thermal Paste Included: Including thermal paste facilitates optimal heat transfer between the heater cartridge and the hotend block, further enhancing thermal efficiency.Easy Installation: The kit's components are straightforward to install, even for those with limited technical experience.Cons:Limited Application: This kit is designed specifically for the Prusa i3 MK4 and might not be compatible with other 3D printer models.Potential for Overheating: While rare, incorrect installation or improper handling can lead to overheating. It's essential to follow the provided instructions and exercise caution during installation.Observations:The heater cartridge and thermistor exhibit solid build quality and appear durable.The included thermal paste ensures efficient heat transfer for consistent printing temperatures.The kit's components fit seamlessly into the Prusa i3 MK4 hotend assembly.The upgrade results in noticeable improvements in print quality and reliability.Recommendation:If you own a Prusa i3 MK4 and are looking to maintain or enhance your hotend's performance, this 3D Printer Heater Cartridge and NTC 100K Thermistor 24V 40W Kit is a highly recommended upgrade. Its compatibility, efficient heating, accurate temperature sensing, and inclusion of thermal paste contribute to a seamless and reliable printing experience. While its limited application and potential for overheating require consideration, the kit's overall benefits make it a valuable investment for Prusa i3 MK4 owners seeking consistent and high-quality 3D prints.
Productos recomendados
Mex $186.00
Mex $ 106 .00 Mex $106.00
Mex $272.38
Mex $ 163 .00 Mex $163.00