Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Impresora 3D PEO PET K1 K1C Placa de construcción para Creality K1/K1C/Ender-3 S1/Ender 5 S1/Ender 3 S1 Pro/Ender V3 KE/Ender3 V3 SE, placa de chapa de acero con resorte flexible PEO+lámina

Envío gratis en pedidos superiores a Mex $600.00

Mex $461.21

Mex $ 230 .00 Mex $230.00

En stock
  • 【Diseño de PEO+PET】Combinamos patrones de diamante y patrones de fibra de carbono en una placa de acero de resorte. Estos dos patrones son comunes y ampliamente utilizados en la vida diaria, y son profundamente queridos por muchos jugadores 3D. La textura del diamante tiene una superficie lisa y un tono mate, combinado con seda u otros filamentos brillantes, que tendrán un muy buen efecto. La textura de la fibra de carbono es muy discreta, y cuando se utiliza con filamentos gris carbón, puede lograr un buen efecto de apariencia.
  • Fácil de quitar: Sahvaim utiliza una placa de acero de resorte de alta resistencia, con buena planitud y elasticidad. No se deforma fácilmente después de repetir la flexión. Enfría la placa de construcción antes de quitar el modelo. Se puede desmontar fácilmente sin utilizar otras herramientas sin dañar, liberando tu ansiedad de impresión.
  • Limpia la placa de construcción PEO PEI antes de usarlo: limpia la placa de construcción K1C antes de cada uso. Puedes utilizar un pañuelo húmedo para limpiar cualquier polvo o huellas dactilares en la superficie, y luego usar un pañuelo seco para secarlo, asegurando que la superficie esté última intervensión de huellas dactilares y otros aceites, de lo contrario afectará la adherencia.
  • 【Resistencia a altas temperaturas】La superficie de la cama con impresión PEO + PET es resistente a altas temperaturas de 150 ℃. Es bueno imprimir PLA/PETG/ABS/TPU. Recomendamos estos filamentos y temperaturas para tu placa de construcción k1 "PLA: 60 ~ 65 ℃; PETG: 70-90 ℃", ABS: 90-100; TPU: 20-40 °C. Si quieres imprimir otros filamentos, ajusta los parámetros.
  • Nota: nuestra placa de construcción PEO PET de doble cara se adapta a impresoras 3D con un tamaño de plataforma de 235 x 235 mm, compatible con K1C/K1/Ender 3 V3 KE/Ender 3 V3 SE/Ender3 S1/Ender 3 S1 pro/Ender 5 S1


Esta placa tiene un tamaño de 235 x 235 mm, con agujeros de posicionamiento y un diseño de doble mango, adecuado para impresoras 3D Creatily K1C/K1/Ender 3 V3 SE/Ender 3 V3 SE/Ender 3 S1/End3 S1 pro/Ender 5 S1 y otras impresoras del mismo tamaño. Sus únicos destacdestacdestacdestacdestacdestacEn el innovador diseño de textura de diamante PEO, que integra la textura de fibra de carbono PET y tiene una excelente compatibilidad, adecuado para varios filamentos de impresión 3D como PLA, PETG, TPU, etc. Satisface diversas necesidades creativas. Está hecho de material de acero de resorte de alta resistencia, que demuestra una dureza y durabilidad extraordinarias, asegurando una estabilidad a largo plazo durante el uso. Después de esperar a que el modelo se enfríe, se puede desmontar fácilmente sin dañar con solo una ligera curva, haciendo que la experiencia de impresión 3D sea más suave y agradable.


DODGE
Comentado en los Estados Unidos el 4 de abril de 2025
Quality build plate
DSVeteran
Comentado en los Estados Unidos el 21 de octubre de 2024
My 1st gen Ender 3 has among it's many upgrades, a Fulament magnetic bed with textured PEI sheet. I thought I'd try this PEO/PET sheet for the decorative carbon fiber and diamond patterns. I have sheets like this for my Bambu Lab X1 Carbon, and it's a cool effect to have for certain prints.My Ender 3 is now relegated to small, low-volume, and backup print jobs but I thought it would be nice to have the capability for these finishes. Performance has been okay, but this sheet is really designed for newer printers, and has two extended tabs on one edge (which help with plate removal) plus two V-shaped notches cut out on the opposite edge. These don't really affect performance other than you have to be careful not to print something (including purge lines) that might go right up to the edge of the build plate on the edge with the notches. As long as you account for that. this plate is compatible with plain ol' Ender 3's.
Customer Review
Comentado en los Estados Unidos el 13 de octubre de 2024
This has quickly become my new favorite build plate due to the pattern/texture left on the first layer.it is more than just looks; it actually does give the bottom layer of the print a unique texture, which it quite pleasant to the touch as well.Both sides of the plate work equally well.The only word of warning for plates like these is that you need to use filaments that have good bed adhesion. Silk filaments or others that don't tend to stick without glue won't work well with these beds, as you cannot put glue down on decorative beds (it will mess up the pattern transfer to the first layer of the print).
Brian M. Gray
Comentado en los Estados Unidos el 30 de septiembre de 2024
After getting used to using my 3D printer I discovered I could start using different materials for build plates. So I started looking into the different options and I found this one with a different textures which I thought would be really nice for some certain prints that I wanted to make. This is pretty much the same as the one that came with my unit and as far as material goes in build quality. The thing that sets us apart is the specific design of the build plate itself allowing you to make some custom prints. I think this is at a fair price and it's pretty cool that you can change out and use both sides. I would definitely recommend this
Productos recomendados