Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

iSpring WSP100GR de Filtro de agua de sedimentos reutilizable 100 micrones con raspador incorporado en la carcasa, cabeza rotativa de 360°, medidor de presión, azul

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,247.30

Mex $ 943 .00 Mex $943.00

En stock

1.Tamaño:1 Count (pack Of 1)


Acerca de este artículo

  • Filtro de malla de acero inoxidable nominal a 100 micras. Roscas dobles en ambos extremos: 1 pulgada MNPT y 3/4 pulgadas FNPT, accesorio empotrado de 1/4 pulgadas incluido
  • Al ras y reutilizables, elimina la carga de trabajo de los filtros más finos que siguen detrás; ayuda a crear un sistema de filtración de gradiente de revestimiento múltiple para mejores resultados de filtración y una mayor vida útil del filtro. La serie WSP se puede utilizar para el tratamiento de aguas residuales girando hacia abajo el sedimento.
  • El sistema se puede instalar en cualquier dirección gracias a la conexión de cabezal giratorio de 360°
  • El cartucho de filtro de malla de acero y la carcasa se pueden limpiar fácilmente girando el raspador, ahorrando tiempo y esfuerzo en el mantenimiento rutinario
  • Soporte de por vida de iSpring


El filtro de sedimentos giratorio WSP es ideal para filtrar los sedimentos del curso. La visualización de acero inoxidable hace que el proceso de lavado y limpieza sea muy simple, lo que permite limpiar los contaminantes a través de la parte inferior del filtro cuando el cartucho comienza a obstruirse. Esto permite que el cartucho de filtro de acero inoxidable se utilice una y otra vez sin necesidad de ser reemplazado. El accesorio MNPT de salida de 1 pulgada proporciona un caudal máximo de 20 gpm, y el WSP100GR también cuenta con roscas NPT de 3/4 pulgadas en la entrada y salida.


T. Murphy
Comentado en Canadá el 7 de noviembre de 2024
Twist, open valve. Screens are clean. What more can you ask for.
C M.
Comentado en Canadá el 8 de enero de 2024
This filter is a quality product. It has a flexible mounting position. The supply line can run either horizontally or vertically. Most competitive products only work with a horizontal line; I required one to work with a vertical supply line (see photo).It filters out all sediment and grit from our well water supply. Unfortunately for me, our well has a large amount of sediment in the water, so the filter requires cleaning regularly. The scraper works well but it is necessary to disassemble and clean the internal 100 micron filter every few months. When the filter is clogged the water pressure drops significantly.I called Nick at iSpring customer support and he was very helpful with cleaning tips.Overall I would recommend this product, but if your water has a lot of sediment you will need to disassemble and clean the filter regularly.
C. Morin
Comentado en Canadá el 5 de marzo de 2023
If people truly knew what is in your municipal water (Gunk), everyone would be wise in purchasing such a filter.I replaced my 19 year old electric hot water tank, and I was dumbfounded to see both 3/4" water pipe (inlet & outlet) just about completely plugged with a hard black color dunk.Now I know when our municipality flush-out the Town's huge water tank reservoir, the gunk is transferred in our drinking water supply, thus without a filter, it collects in our washer, dishwasher, H.W.T. & our drinking water.
rodney large
Comentado en Canadá el 5 de diciembre de 2023
Looks good smaller than picture
Allen Howard
Comentado en los Estados Unidos el 31 de diciembre de 2020
I picked up a couple of Sharkbite 3/4” male NPT fittings and a couple of 3/4” Sharkbite ball valves and finished the install in 15 minutes. Installation steps were...1. Turned off the main water supply.2. Opened the nearest faucet to drain as much water as possible.3. Cut the existing 3/4 copper pipe. Used a bucket to catch any residual water in the line.4. Teflon taped the MNPT fittings5. Decided that I didn’t need the supplied bracket to support the unit. I can install it later, if needed. Right now, the bracket holds the wrench.6. The unit allowed me to turn it 180° to match my water flow direction.7. Put it all together on the line.8. Turned the main back on along with the new valves.9. Recorded a baseline pressure/flow reading from the unit’s gauge to know when it’s time to flush and scrape it.10. Done!I debated which mesh, 50 micron or 100 micron, would be the best fit for my well water. Decided on the 100 micron. A few days after install I noticed that the mesh wasn’t catching a lot of material while my whole house filter down the line was getting slammed, so I emailed Don in customer service. He was responsive and professional, even during the holidays and the pandemic! He let me know that he was sending me out a 50 micron mesh to fix the problem. Great customer service, iSpring!I really like this spin down with built-in scraper unit although I wish I could have afforded the automatic one. I really don’t want my wife with her bad back having to go in to the crawl space to service the unit. Either way, I’m thinking about tying this in to my drain which is about 10 feet away. The 5 gallon bucket works fine, for now, though. Overall, I’m very happy with the product and the customer service.
Productos recomendados

Mex $4,650.00

Mex $ 1,881 .00 Mex $1,881.00

4.9
Elegir

Mex $1,252.00

Mex $ 538 .00 Mex $538.00

4.6
Elegir

Mex $1,369.75

Mex $ 602 .00 Mex $602.00

4.4
Elegir

Mex $3,433.72

Mex $ 1,373 .00 Mex $1,373.00

4.3
Elegir