No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Juego de filtros BLAUEOCHI ND para DJI O3 Air Unit UV/CPL/ND8/ND16/ND32/ND64 Filtro para drone FPV DIY con lente DJI O3 ND Filtro diseñado para DJI O3/AVATA
Para quitar el filtro, tira de la carcasa de la lente hacia afuera aplicando poca presión en la dirección opuesta a la carcasa de la lente y el filtro se aflojará. Si utiliza el filtro en un dron FPV de alta velocidad, el lado vertical será más apretado que los laterales. Si hay un accidente de dron, el filtro será más seguro y menos probable que se caiga. Para la lente y el filtro, todos son muy pequeños, se necesita más paciencia en la instalación.
Jason E. Bailey
Comentado en los Estados Unidos el 16 de marzo de 2025
I used these ND 16 and 8s on my FPV Quads with DJI air 03 unit and the results are fantastic. It allows me to fix camera settings and avoid the frequent exposure changes that comes from auto mode without filter use. If you’ve not flown FPV with ND filters you’re gonna love the results. However, Im going with 3 stars because I can’t buy just ND 16 filters. I have no use for anything darker, nor the colored filters. And I crash a lot, finding the filters will typically pop off or break after taking the brunt of impact. No fault of product, but paying for something I won’t use is a tough pill to swallow.
Peter Soares
Comentado en los Estados Unidos el 27 de julio de 2024
I have been using this filter set for my Geprc Cinebot30 since April 2024. Upon opening the set, I discovered some filters were missing. This was immediately concerning, though it wasn't critical for the shoot. I returned it and promptly received a new kit with the correct components.However, I must highlight, the filters rely heavily on the O3 camera's notches for security. One moderate crash and the lens is lost. I already misplaced my CPL filter during a backyard flight; it hit the grass and is now lost, possibly forever. There needs to be a better way to ensure the filters stay securely in place.Additionally, claims of water and dust resistance are unfounded. Flying on a misty day left the filters covered in water, which necessitated manual cleaning. Dust also accumulates easily on the filter and camera itself. There is no simple mechanism to secure the filter close to the camera, which is problematic.Despite these issues, the filters perform well with no color shift in the image and performs as intended (as long as you fly in good conditions).
Antonio Campos
Comentado en México el 17 de noviembre de 2024
La verdad es una excelente opción para proteger la cámara de la O3, y si da buena imagen.
Angel
Comentado en los Estados Unidos el 15 de septiembre de 2024
Updated: Two of the six filters in the case fit a little loose, I was lucky I caught it right at take off and didn’t loose it far away mid flight. Could just be the set I received but once is enough for me so I’ll be returning. Build quality still feels good, unfortunately I don’t want to be worrying about loosing one.Previous review: Nicely made filters. They fit securely on the gimbal and won’t fall off.
Joffrey
Comentado en los Estados Unidos el 20 de junio de 2023
These aren't obvious in the way that they install. Do you twist it? Do you just press it on? I think it is the latter, as it won't twist on, or off.And when you press it on, it is barely on. I haven't tested it in flight, but I don't expect these to last long. They will probably fall right off, in my hoping that I am installing them like the manufacturer expects me to. I have no idea as they don't instruct you in their usage.Why would you send something out without instructions? Especially when you are using such horribly made up combinations of English letters. I had this at 3, but the more I think about it, the less stars you should get for purposely keeping information from the customer. Thanks for the aggravation.
Stephen
Comentado en los Estados Unidos el 1 de diciembre de 2023
I almost lost a filter after a crash. I thought it was on securely. I tested the fit by pulling on it a little, seemed fine. Later i had a minor crash and realized i had lost the UV filter. Luckily i was in my yard and was able to find it. When i found it i noticed that the lens itself was popping out of the housing. It wasn't a hard crash. I returned these so i could try another brand. Falling off my drone and popping out of its own housing is unacceptable. I'm just glad i was able to find it so i could return it.
Productos recomendados
Mex $5,977.58
Mex $ 1,881 .00 Mex $1,881.00
Mex $394.00
Mex $ 193 .00 Mex $193.00
Mex $1,710.39
Mex $ 803 .00 Mex $803.00
Mex $619.00
Mex $ 321 .00 Mex $321.00
Mex $432.44
Mex $ 224 .00 Mex $224.00