No hay artículos en el carro
No hay artículos en el carro
Contenido del paquete:
1 manija de puerta delantera exterior derecha del lado del pasajero sin agujero de cerradura.
1 manija de puerta delantera exterior izquierda del lado del conductor con ojo de cerradura.
1 manija de puerta trasera exterior derecha del lado del pasajero.
1 manija de puerta trasera exterior izquierda del lado del conductor.
Condición: Nuevo
Compatible con:
Chevrolet
Chevrolet Silverado 1500 Crew Cab 1999-2006
Chevrolet Silverado 1500 HD Crew Cab 2001-2003.
Chevrolet Silverado 1500 HD Crew Cab 2005-2006
Chevrolet Silverado 2500 HD Crew Cab 2001-2006
Chevrolet Silverado 2500 Crew Cab 2004
Chevrolet Silverado 2500 HD Crew Cab 2007
Chevrolet Silverado 3500 Crew Cab 2001-2006.
Chevrolet Tahoe 2000 sin paquete Z71
Chevrolet Tahoe 2001-2006.
Chevrolet Suburban 1500 2000-2006.
Chevrolet Suburban 2500 2000-2006.
Chevrolet Avalanche 1500 2002-2006.
GMC
1999-2006 GMC Sierra 1500 Crew Cab
GMC Sierra 2500 HD Crew Cab 2001-2006.
GMC Yukon SLE 2000
GMC Yukon SLT 2000
GMC Yukon 2001-2006.
GMC Yukon XL 1500 2000-2006.
Cadillac
2002-2006 Cadillac Escalade Base
2003-2006 Cadillac Escalade ESV Base
2002-2006 Cadillac Escalade EXT Base
Números de pieza de ajuste preciso:
15034985, 15182406, 15721571, 15721572, GM1520105, GM1521105, GM1310129, GM1311143, 25942272, 77261, 80579. 578
¿Manija de puerta rota? ¿No puedes subir a tu coche? ¿Estás buscando la manija de puerta de la más alta calidad y mejor valor de repuesto? Nos lo merecemos. Nuestra manija de puerta exterior e interior, para reemplazar tu pieza vieja o rota, cumplirá o superará los estándares OEM.
Chad
Comentado en Canadá el 26 de marzo de 2025
Good quality, easy to install
Joy Poore
Comentado en los Estados Unidos el 26 de marzo de 2025
Works great. Wonderful price.
Darren
Comentado en los Estados Unidos el 15 de marzo de 2025
Perfect fit. Could not ask for a better product.
Gus G.
Comentado en los Estados Unidos el 14 de abril de 2024
The wire clips used to secure the unlocking mechanism (which are orange in the handles that were delivered to me) were flipped so I took the ones off from the stock handles and reused them. Overall, they work fine and you'll probably have to make minor adjustments to the thread located on the inside of your vehicle so that the grab handle is not loose. Happy with the appearance amd function.
GAM
Comentado en los Estados Unidos el 29 de agosto de 2023
So, I wrote this review and just before I submitted it I went to double check something. I updated my review based on what I found, originally I was going to give this 3 stars. However, the listing is clear if you actually read it (which I didn't). This doesn't fit a 2004 Chevy Avalanche 1500 Z71. So that's my fault. Read on though, because it'll actually work just fine. I think the difference must be the thread on the three bolts that mount the handle's plate because everything else seems identical to my old handle.Original review: I got this to replace my broken handle on a 2004 Chevy Avalanche 1500 Z71. Replacement should have been very simple. Remove two bolts for the plastic cover, remove three bolts for the old handle. Unclip the rods that go to the releases and put it all back in reverse order.Things went wrong when I went to put the new handle in and tighten the three bolts for the new handle. This handle doesn't come with new bolts so I had to reuse the original bolts, which is what I expected. What I didn't expect was for the bolts not to fit.They started threading but got very tight within about a 1/2 turn. At first I thought I cross-threaded the bolt so I took it out and tried again. No luck. I tried another bolt, same thing. So I took the handle out and tried the bolts with the handle out of the car.I immediately saw that the threads on the handle were not quite right. I thought maybe paint was the issue. I tried wrenching the bolt down a little, handle still out of the truck. It quickly became apparent it wasn't paint.At this point I got out my thread cleaning kit. I found the right size cleaner and spent about 10 minutes cleaning out the threads on all three holes. After that the installation was easy. If this were a stressed part I'd be worried because I took a fair bit of metal out of the threads but it's a mounting plate. Besides, the stupid GM design of the plastic clips to hold the release rods means the whole thing is going to fail again in a few years.So, in the end this worked, but you might need a thread cleaning or tap-and-die set to make it work if you have a 2004 Avalanche 1500 Z71. Either that or new bolts.
Productos recomendados
Mex $483.12
Mex $ 236 .00 Mex $236.00
Mex $473.31
Mex $ 212 .00 Mex $212.00
Mex $390.82
Mex $ 203 .00 Mex $203.00