No hay artículos en el carro
No hay artículos en el carroPrstudy - Kit de boquilla de cerámica para Flashforge Adventurer 5/5M Pro Hot End Kit de calefacción, boquilla endurecida desmontable, alta conductividad térmica, cabezal de impresión
Diana Laura Quiroz Valdivia
Comentado en México el 14 de marzo de 2025
Me llegó en malas condiciones, roto sin el cristal
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Peter
Comentado en los Estados Unidos el 23 de febrero de 2025
I have a couple of the stock hot ends and they're incredibly easy to swap in and out because the connector is molded with it. This is not, it's very difficult to install. If you install the connector first, the heatsink won't go in, if you install the heatsink first, it's impossible to plug the connector without randomly jamming hoping to get it in.Then there's there's the mechanism to secure the heating element and the thermistor, it's literally just a stainless steel jacket that doesn't fit so the silicone jacket easily pulls it off and the assembly just comes apart easily.I got my stock hot ends for $29.99, from Amazon, they run about 39.99 so this does seem like a good value, but it's not worth the trouble.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Paul Haban
Comentado en los Estados Unidos el 12 de febrero de 2025
This was an easy install. The hot end is function and allows for more nozzles to be added on.
Lilia
Comentado en México el 3 de junio de 2024
Excelente producto
Polo
Comentado en México el 5 de diciembre de 2024
La caja es práctica por su tamaño, y es bonita en su construcción y acabados. El único tema son las esponjas para los relojes, son de muuuuy pobre calidad, parece que la esponja está recubierto de papel, y se sienten débiles, frágiles
Agustín moreno romero
Comentado en México el 7 de noviembre de 2024
Excelente presentación
Omar
Comentado en México el 9 de octubre de 2024
Es un producto economico pero por el costo lo recomiendo la calidad es buena en general.
Parra
Comentado en México el 18 de octubre de 2024
Si buscas un estuche descente solo para guardar tus relojes es una buena opción, la calidad no es la mejor pero tampoco es mala, si buscas un estuche lujoso entonces busca otra opción
JC
Comentado en México el 10 de octubre de 2024
Muy mala calidad en todo, la caja pésimos terminados igual que los cojines para los relojes, muy poco adecuados para guardar adecuamente las piezas.
Héctor V.
Comentado en México el 9 de agosto de 2023
Hola, mi experiencia con este producto fue mala, llegó con una parte de la tapa cuarteada, con el pegamento visible y el interior lleno de polvo. Lo peor fue el listón que sostiene la tapa con la base, pues viene con unas grapas muy pequeñas en profundidad y por lo tanto endebles. Por el precio que no es excesivo me lo quedaré, pues me dan mucha flojera estos procesos de devolución y reembolso. Si buscas algo económico con el riesgo de algunos detalles, adelante, pero si eres quisquilloso o perfeccionista no te lo recomiendo.
Productos recomendados
Mex $188.00
Mex $ 112 .00 Mex $112.00
Mex $312.39
Mex $ 171 .00 Mex $171.00
Mex $853.06
Mex $ 417 .00 Mex $417.00