No hay artículos en el carro
No hay artículos en el carroPeter Walker
Comentado en los Estados Unidos el 4 de febrero de 2025
See above.
Rafael Leon Torres
Comentado en los Estados Unidos el 12 de febrero de 2025
Variedad de fitting para reparar averetias de todo tipo
hans
Comentado en los Estados Unidos el 27 de octubre de 2024
I planned for have one or 2 leaks , once I turned on the water to fridge..... amazed...none. I used one way valve at fridge line... also a turn valve coming out of the wall...the full length of tubing. and a 90 degree connector under countertop... had to drill thru the bottom back of 6 cabinet dividers to get to the cold water under sink. Took 2.5 hours... start to finish. But in the end, zero leaks. Worked perfectly. Remember to feel for 2nd "click" when pushing tubing into these quick connectors and quick valves. Great kit.. only missing the brass tap for under sink . Also available on amazon.
AdaBill
Comentado en los Estados Unidos el 29 de abril de 2024
I purchased a new refrigerator with Automatic ICE Cube maker. When it came I noticed that there wasn't a shutoff valve on the water supply. I have finished ceilings in the basement and I had to turn the whole house OFF to install the water line to the new unit. I looked around the local hardware stores and the cost of a 1/4" inline water valve was more than the cost of this whole kit. I used the cutter supplied in the kit to cut the line and inserted the supplied valve inline. Very Easy process. Turned the water back on and watched the new connection for 1/2 hour for leaks before I pushed the refrig back into position.
MacWiz
Comentado en los Estados Unidos el 5 de diciembre de 2023
My GF has ordered a new refrigerator with double ice maker. She needed a water line to be installed. This item comes with a huge amount of TOUGH Pex tubing and just about every fitting and valve you might possible need for the job. It even includes a tubing cutter (as Pex must be cut square for these fittings). The fittings are easy to use as they are what is commonly known as "SharkTooth" fittings. To connect, you simply push the tubing into the fitting firmly and it become water tight. Every conceivable connector is included from elbows, splitters, straight through and even two ball valves, one a straight through and the other an angled valve. I believe that this represents a super value.
Productos recomendados