No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Kit de herramientas de reparación de roscas 10PCS para M18 * 1.5
- 1. El montaje del juego de tornillos de alambre en el orificio del tornillo de la pieza de trabajo hecha de aleación de aluminio y otros materiales puede formar una rosca interna estándar de alta precisión, resistente al desgaste y de alta resistencia. Aplicaciones típicas: aparamenta de alta tensión, comunicación por microondas, autopartes, equipos de separación de aire, radiadores, etc.
- 2. Cuando hay un error en el procesamiento de la rosca o cuando se repara un orificio roscado interno dañado, el uso de un inserto de hilo de alambre como método de reparación puede reparar el orificio roscado de manera económica y efectiva. Los mismos tornillos también se pueden utilizar después de la restauración. Aplicación típica: reparación de dientes resbaladizos en orificios roscados de piezas, como reparación de orificios roscados en plantillas de máquinas de moldeo por inyección.
- 3. Es conveniente y rápido usar el inserto de tornillo de alambre para convertir el sistema métrico al orificio roscado del sistema imperial. El equipo importado o la rosca mecánica en pulgadas está dañada y se debe cambiar a rosca métrica debido al suministro de repuestos.
Kit de reparación de roscas M18x1.0.197 in de 10 piezas
Especificación:
- Tipo de artículo: kit de reparación de roscas.
- Material: Acero inoxidable
- Inserto roscado estándar: M18x1.5 (longitud 1.5D)
Instrucciones
- Primero, use la broca del mismo tamaño para perforar el agujero.
- En segundo lugar, use un macho de roscar (especial) con inserto de rosca de alambre para roscar, y la profundidad de roscado debe exceder la longitud de instalación del inserto de rosca de alambre.
- En tercer lugar, coloque el manguito de hilo de alambre en la llave de instalación con la cola hacia abajo, gire el mango de la llave de instalación para atornillar el manguito de hilo de alambre en el orificio roscado.
- En cuarto lugar, alinee el mango de montaje (cola) con una herramienta de rotura y golpee la herramienta de rotura con un martillo, y se puede quitar el mango de la cola.
- En quinto lugar, cuando hay un problema con la instalación del manguito del tornillo de alambre (como dientes saltones), el manguito del tornillo se puede sacar con una herramienta de extracción del manguito del tornillo de alambre.
Nota:
- Tenga en cuenta que el tipo nuevo y el tipo antiguo de este producto se enviarán al azar, y asegúrese de que no le importe antes de realizar el pedido.
diego
Comentado en Canadá el 7 de marzo de 2025
Amazing I had a plug in my downpipe that got stripped and wow it’s actually amazing how well this worked just throw some locktite on the new threads you’re putting in
Shelby
Comentado en los Estados Unidos el 15 de septiembre de 2023
I used this for an O2 sensor thread replacement as my exhaust header bung was destroyed. A thread chaser would not suffice and research suggested a helicoil would be the best option. I took a chance with this product and it paid off big time. I suggest do your research, watch a few videos and this kit will do what it’s intended to do. One major thing to note, you will need to purchase a handle for the tap, being that’s its so large. Take that into consideration as this kit only provides most of the items you will need to complete the job. But for the price you really can’t complain. You’ll need a high speed heavy duty drill for sure, something that has a couple hundred pound foot of torque to drill out your mangled whole, my 12v Milwaukie impact driver did not suffice, so I used my electric impact wrench with cutting oil. I only needed about 4 threads so I ended up using a cut off wheel on the coils but later learned with sharp clippers/snippers you can cut to your desired height. I didn’t take any before or after pictures because I got carried away with the job. And I installed the O2 sensor back in and moved along. But I am writing to ensure the future buyers of this product that it will indeed fix your ruined threads on your O2 sensor for sure. I never used a tap or coil insert like this and I was able to do the job just fine. Any complaints on this product is because the user lacked skill and understanding. The only thing that would have made this kit better would be an included handle but then the overall prices would have went up. Expect to pay about 20-30 dollars for a handle but even then your coming in less overall compared to other options. And you will have spare coils for the future in case you experience this mishap again or need to help someone else out.
GeeWhizz
Comentado en Canadá el 23 de marzo de 2022
I originally hesitate buying this product because it isn't genuine Heli-Coil, which was over $200! I ordered it from a local supplier but it took 2 weeks and still not product. Then Amazon sent me a reminder of this product and the price was reduced to $68 and guarantee next-day-delivery, at this point I could not resist. When the product arrive I was very happy with the over all quality and the tooling included. The project I was about to undertake was a spark plug hole thread repair. The Heli-Coil kit cam with 3 or 4 turn coils but this kit came with 10 or 12 turn coils which allowed me to cut a 6 coil turns which fit my Aluminium head perfectly - Highly recommend this kit!
Bersham
Comentado en los Estados Unidos el 28 de noviembre de 2022
I ended up trimming the insert, since I only needed about 4 threads for my O2 sensor. It worked really well. I don't know why anyone would have a hard time with this kit. Just use a little lube throughout the drilling and rethreading. It helps with the heat.
Tj
Comentado en los Estados Unidos el 3 de septiembre de 2022
09' Nissan Versa bank 1 sensor 1 removal took out all threads with the sensor. I didn't use the drill bit because of how badly the o2 bung was mangled.. just tapped it. The tap supplied works if you know how to use a tap, it worked with a foot + of extentions and cycling with a ratchet so be patient and it will work. The coil / rethread inserts were too long for my application so I broke one for measurement purposes and trimmed another to fit. Zero instructions provided, why break off the coil end piece & leave it clogging or ratteling in your exhaust system when you can break it by pulling it out with needle nose pliers? 4 stars so the newer diy know to pay attention. If you are a diy person lacking experience learn how to drill / tap any piece of soft metal before using this in a more than likely hard to reach and costly piece of exhaust pipe that you can easily ruin. I'm very happy with the $50 instead of the $200+ brand name helicoil o2 sensor thread repair kit, one more beater back on the road for cheap.
Productos recomendados
Mex $639.00
Mex $ 325 .00 Mex $325.00
Mex $369.00
Mex $ 184 .00 Mex $184.00
Mex $3,879.00
Mex $ 1,823 .00 Mex $1,823.00
Mex $750.10
Mex $ 397 .00 Mex $397.00
Mex $933.72
Mex $ 438 .00 Mex $438.00