No hay artículos en el carro
No hay artículos en el carroKit de soldadura de plástico de 130 W de Ppizkk Reparación de piezas de plástico, ahorra dinero. No tires tu artículo favorito y caro debido a una pequeña rotura, puedes fijarlo con un soldador. Confía en el kit de reparación de plástico de Ppizkk para marcar la diferencia en tu vida y será una buena opción para ti. Nuestros clientes han ahorrado miles de dólares con nuestro kit de soldadura de plástico. Cuanto más repares, más buscarás artículos para reparar. Multitipo, multimaterial, restauración multicolor Lleva reparaciones y parches de plástico al siguiente nivel con un kit de soldadura de plástico de grado profesional de Ppizkk. 56 varillas de soldadura de plástico (ABS/PP/PE/TPE/PC/PUR/PA). 35 varillas de soldadura LDPE en 7 colores. Satisface tus necesidades de diferentes colores y materiales para una restauración perfecta 3 en 1. Kit de soldadura versátil El kit de soldadura de plástico viene con todo lo que necesitas para hacer rápido, eficiente y Reparaciones fiables en una variedad de superficies de plástico con mayor precisión. Tu seguridad es nuestra máxima prioridad, estas sugerencias para tu mejor uso. Espero leerlos pacientemente. Advertencia de alta temperatura, no tocar. Los nuevos productos tienen una capa protectora especial, el primer uso de una pequeña cantidad de humo generado. El color de la pieza del tubo de acero inoxidable cambiará. después del primer uso, pero no afecta al siguiente uso. No desenroscar la punta mientras está caliente. Espera a que la punta se enfríe antes de reemplazarla. El metal puede volverse frágil a altas temperaturas. Quemarte en un instante. Mantén la punta de soldadura limpia y retira los óxidos a tiempo. Será más seguro poner el soldador de plástico en el soporte de hierro. Detalles del producto: 1 kit completo de soldadura de plástico, plancha de calentamiento rápido con soporte. 91 varillas de soldadura de plástico. 5 cuadrados de malla reforzada. 1 cepillo para polvo de alambre resistente. 5 puntas adicionales. 3 papeles de lija. 1 destornillador. 1 manual (idioma español no garantizado)
paul hill
Comentado en los Estados Unidos el 9 de marzo de 2025
Nice
Wtay
Comentado en los Estados Unidos el 2 de febrero de 2025
Stopped working after plugging in for the first time. I installed the tip into the welder, plugged it into a standard outlet, then sat it on the holder so it could warm up. After a couple of minutes there was a loud pop and smoke started coming out of the welder. Unplugged it immediately to let it cool down. Wouldn't power on again after that. Didn't even get to use it once.It comes with a lot of accessories and it's really cheap, which is why i bought it, but now I understand why it's priced so low. Now I have to go through the hassle of returning this. Definitely spending a little more and finding a better quality welder next time.
Mechsrt
Comentado en los Estados Unidos el 7 de abril de 2025
Works great and it had quite a bit of wire mesh and plastic rod supplies that came with it.
Jan Heffken
Comentado en los Estados Unidos el 6 de diciembre de 2024
The kit had everything I needed.
Bryan J. Lowder
Comentado en los Estados Unidos el 23 de octubre de 2024
The first thing I noticed is that the plastic welding heads fit rather loosely into the body. In fact, the shaft is not circular in cross-section, and the brass heads only stay in place when rotated to specific angles and the set screw is twisted all the way. The loss of freedom in choosing an angle is annoying, and the loose fit is not good for heat transfer.When I started it up, it smoked a lot more than I expected (from inside the heat element).It melted plastic with reasonable speed. The brass brush cleaned the spade tip well when it was cool. The brass brush started to get gimpy bristles quickly. Maybe a brush with shorter bristles would work better.I liked the click on-click off switch and indicator light. The soldering tip fit perfectly and seemed nicely coated and polished. However, when I pulled out the soldering tip, there was a sort of ash or hard water-stain looking stuff inside. When I put the spade tip back in, I was unable to tighten the lock screw enough to fix the head in place, even though I had done it minutes before! Working the screw back and forth with the included screwdriver wasn't helping.I used a little bit of citric acid and water to free the screw, which seemed like it was blocked by some kind of ash or mineral deposit. I'm guessing it came from the smoke, because I hadn't gotten it anywhere near water before. Eventually the screw could be tightened adequately.The welding rods, stainless steel mesh, and aluminum tape were helpful. The welding strips were only LDPE, which as a little disappointing to me, as I was hoping the color code indicated the type of plastic (as it did for the rods). The stubby screwdriver was nice but seemed unnecessary. The foam pads-- I didn't know what they were for.What I got for the price was good, but the trouble I had with the screw almost convinced me to return it (even though I'm not sure it's still eligible). I'm glad I got it working again to avoid the hassle of a return or replacement. I might try replacing the screw with a longer one.
Productos recomendados
Mex $493.27
Mex $ 251 .00 Mex $251.00
Mex $467.00
Mex $ 233 .00 Mex $233.00