Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Kohler 1039861 Pieza de repuesto

Envío gratis en pedidos superiores a Mex $600.00

Mex $737.91

Mex $ 391 .00 Mex $391.00

En stock

1.Color:Rosa B


  • Protege los productos KOHLER siempre busca el logotipo de KOHLER ORIGINAL PARTS
  • Kit de válvula de descarga de repuesto
  • Diseñado para promover la longevidad del producto.
  • Fabricado con materiales de primera calidad para una mayor durabilidad.


Protege los productos KOHLER, siempre busca el logotipo de piezas originales de KOHLER. Las piezas originales KOHLER están diseñadas por ingenieros de KOHLER para mantener el rendimiento original del producto y promover la longevidad del producto.


Manjusha Gossain
Comentado en Canadá el 6 de marzo de 2025
Good the product worked
James
Comentado en los Estados Unidos el 8 de agosto de 2024
Works perfect for Kohler toilet! Exact fit, Kohler quality! Thank you!
Cliente de
Comentado en México el 12 de marzo de 2024
Desgraciadamente no pude eliminar la fuga de agua.Posiblemente esta defectuosa la refacción.Tal vez me tocó mala suerte.Estoy esperando un plomero para ver si se puede solucionar algo o cambiar el wc.
Noé Larraga
Comentado en México el 29 de febrero de 2024
Fácil de instalar
jgm756
Comentado en los Estados Unidos el 20 de diciembre de 2024
Identical part, soaked the gasket for 15 min, installed in 5 min.No leaks.Very happy!
Mike
Comentado en Canadá el 14 de abril de 2024
The flapper on my toilet broke and when I looked in the tank I saw that the gasket was disintegrating so I ordered one of each. When I installed the flush valve with the new gasket the plastic clips on the flush valve cracked and this is when I realized that I can’t buy just the flush valve I have to buy the kit. So now I have a spare flapper and gasket.Just buy the kit and everything will be new and get peace of mind!
No BS Customer
Comentado en los Estados Unidos el 10 de noviembre de 2023
Before you put this assembly in your tank, make sure you remove the rubber seal and align the three prongs with the three points of the triangle inside the tank. If the assembly goes in and goes flush, you are ready to go. If not, you will have to trim the points of the tabs on the assembly by 1/8 of an inch, so this way once you put the seal and press down, they will not break. I found that adding a little bit of silicone grease on both sides of the seal before putting it on the assembly. Make the installation a lot easier. The silicone grease makes it easier to spin the assembly for the three tabs to engage under the tank.
Productos recomendados

Mex $266.64

Mex $ 138 .00 Mex $138.00

4.6
Elegir

Mex $606.04

Mex $ 272 .00 Mex $272.00

4.3
Elegir

Mex $632.55

Mex $ 347 .00 Mex $347.00

4.6
Elegir

Mex $3,284.29

Mex $ 1,412 .00 Mex $1,412.00

4.6
Elegir