No hay artículos en el carro
No hay artículos en el carro Cómo usar:
Reemplace el cabezal de molienda, encienda la máquina, deje en ralentí la amoladora eléctrica y se puede usar
Especificación:
Tipo de artículo: Lijadora eléctrica
Material: Plástico
Potencia: 18W
Especificaciones del enchufe: enchufe de EE. UU. 100-240 V
Velocidad sin carga: 8000 (rpm)
Peso aproximado. 278g / 9.8oz
Lista de paquetes:
1 x Pen Sander8 x Varilla pequeña
2 x de lija
1 adaptador de corriente
1 manual en chino e inglés
Audi
Comentado en los Estados Unidos el 5 de marzo de 2025
I customize shoes and paint them so this sander design was a perfect size for me. The speed is phenomenal compared to hand sanding. Was definitely a great purchase.
Javier Zamora
Comentado en México el 7 de enero de 2025
Lo estoy utilizando en Modelismo, realmente ha sido poco su uso. Hasta el momento me ha dado el resultado esperado.
Clint Campbell
Comentado en Canadá el 12 de enero de 2025
Works but not overly well. Not worth the price should be $10 at Princess Auto
Mark W.
Comentado en los Estados Unidos el 3 de junio de 2024
Pros:Price seemed reasonable.*UPDATE* The seller offered me a 45% refund so I decided to keep this.I made some modifications that make it quite useable:I used a small metal box, a Sucrets cough drop tin, and installed a DC motor controller as well as a female plug soclet for the power supply and a male plug with a cable for the sander.Using some CA glue, super glue, and some baking soda I filled in the concave areas on the sanding heads. I also printed some new ones with my 3D printer, and am using double sided foam tape between the sand paper and the heads although I may change that to velcro so I can use sand paper meant for larger sanders that is already backed with flocking that sticks to velcro.I used a different power supply in the end, 12 volts 500ma, as the other was too high an amperage and could fry the motor.After opening the tool I used some vasoline to lubricate everything plastic inside and installed two pieces of neoprene cut from to act as dampers/shock absorbers for the ocillating shaft which reduced vibration significantly, then I enlarged the vent holes to keep the insides cooler.The last modification was a soft foam bicycle handlebar grip that I cut vent holes in corrispomding to the holes on the body of the tool.The tool is now very handy and much more useable as well as more comfortable to hold.Cons:This is the claim on the product page, "High frequency linear polishing pen...", what you get is a side to side motion sander that does so very violently! It will I believe soon destroy itself with the violence of the side to side motion.It is very fatiguing to hold while it is running, I've used palm sanders that were easier on the hand that this.The sander comes with only two sheets of self adhesive sandpaper, prophetic if you ask me as I doubt it will outlive the supply.Does not so much sand items as rip and gouge material off their surface and thereby remove the grit from the sandpaper rapidly as well.Has only one speed, ridiculousy fast, and therefore is useless for delicate modeling or sculpting.Conclusion:I will be returning this badly designed thing very soon.
David
Comentado en los Estados Unidos el 30 de noviembre de 2024
This is a great sander if used for its intended purpose. A mini Pen Sander should tell you what its capabilities are... First you can never put pressure on any wood sander.Let the speed of the sandpaper do the work not your pressure. All sanders will die if you press downward. As a woodcarver I use this for detail work. If I want to sand a board before carving, a mini sander is not what I want. If you think you need more pressure change the grit of the sandpaper or use a different sander.There are many areas in woodcarving on softer wood that no other sander can smooth or round or make a tiny bit bigger. There is no other sander that will work. When the sander goes in an Orbital directions, side to side, it is so you can smooth out the area that you are sanding without leaving trails. This is for the wood craftsment.I wish you knew how many tools that people buy and then get broken or cause injury because the tool is being used incorrectly. This is a great sander if used for its intended purpose
SICMETALS
Comentado en los Estados Unidos el 21 de septiembre de 2024
This is a great sander for models or fine details. It removes material slowly and works best with a very light touch. Don't press down! Just let the weight of the tool do the work and you will have great results. Keep in mind this sander is meant to remove very small amounts of material, and that takes time!
Productos recomendados
Mex $10,072.62
Mex $ 1,881 .00 Mex $1,881.00
Mex $608.28
Mex $ 316 .00 Mex $316.00
Mex $10,490.58
Mex $ 1,881 .00 Mex $1,881.00